- Home
- Equipment
Refine by
Erichsen Environmental Equipment & Supplies
17 equipment items found
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The cross-cut test is the oldest test method established worldwide for evaluating the adhesive strength of coating materials on substrates lying underneath, still has nothing lost of its popularity and validity and continues to be present across all industries, and even nearly ubiquitous. The evaluation of the test results according to valid standards, i.e. their assignment according to the ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The TINT TESTER 527 has been specially developed for measuring the brightness of dark pasty test coatings (e.g. applications of pigment pastes for determining the tinting strength according to ASTM D 3265 and ASTM D 2745). This model also enables standard brightness values to be measured on solid samples (lacquer layers, paper, plastic surfaces, etc.). The TINT TESTER consists of the stationary ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
An ideal instrument for applying defined layers of liquid media (e.g. as flexographic inks) onto absorbent or non-absorbent substrates for manufacturing repeatable sample presses that comes very close to conventional flexographic printing. The application conditions are determined using either the engraved anilox rollers or the wire-wound rollers. The AUTOMATIK K-LOX Roller 622 consists of an ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The Model 475 density ball is used to quickly and easily determine the density of paints, coatings and other (non-paste) liquids. The Model 475 density ball consists of a spherical immersion body (stainless steel, material No. 1.4305) and a holding rod with a taper. The following versions are available: Model 475/I, with a volume of 100 ml ± 0.1%, (at 20 ° C), Model 475/II, similar but ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
For measuring pulling and compressive forces, open cable ends, cable length of approx. 5 ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
With the button below you can add products to a cart if you want us to do a quote for this product. This sheet testing machine is very well suited for testing materials with mid-range sheet thickness (from 0.1 to approx. 3.0 mm). It is preferred by sheet metal manufacturing/processing companies for carrying out fast and reliable quality control. ERICHSEN cupping tests on all ferrous and ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The PaintChecker mobile LED Blue 591 is a photothermal measuring device used for the non contact and non destructive determination of coating thicknesses in accordance with DIN EN 15042-2. Specially developed for the measurement of powder coatings before curing on various substrates such as steel, aluminium and ceramics. Cured coatings can also be measured. The precise layer thickness measurement ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
Lacquer and Paint Testing Machine, Model 202 EM, with electromotive drive, equipped with a laterally opened test head, test tool in accordance with DIN EN ISO 1520, electric installation for connecting the illumination of the microscope as well as a digital display for the acquisition of the ERICHSEN cupping value, with integrated preselection counter for setting the maximum cupping value ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
With the button below you can add products to a cart if you want us to do a quote for this product. The HYGROTHERM 519 is state-of-the-art technology. The operating and control operations are minimized or automated. With its large 300-litre, standard-compliant test chamber made of acid-resistant and heat-resistant plastic, the HYGROTHERM 519 is also ideally suited for continuous testing and ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The Model 263 indentation hardness tester consists of a metal block in which two pointed feet and the indenter are mounted. The indenter, made of hardened steel, is a wheel with a cutting-shaped (120°) ground edge. The total mass of the tester is 1000 ±5 g. The test load is set in the range of 4.90 N to 4.95 N (corresponding to 500 to 505 g). Thus, it meets the requirements of all ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
This hand-operated testing machine is used to determine the deep-draw properties of ferrous and non-ferrous metals. It uses the ERICHSEN deep-draw test on sheets and strips from 0.1 to 1.5 mm thickness (400 N/mm² tensile strength) as well as on foils with a minimum thickness of 0.005 mm. This machine is easy to use so it is well suited for use in facilities requiring low levels of sheet ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
With the button below you can add products to a cart if you want us to do a quote for this product. This sheet testing machine is very well suited for testing materials with mid-range sheet thickness (from 0.1 to approx. 3.0 mm). It is preferred by sheet metal manufacturing/processing companies for carrying out fast and reliable quality control. ERICHSEN cupping tests on all ferrous and ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The PHYSIMETER 906 USB measuring device is used to record mechanical variables based on strain gauge sensors. Two different versions are available: The PHYSIMETER® 906 USB with a built-in force transducer and the PHYSIMETER® 906 USB configured to connect to an external sensor. There are three micro-batteries (type LR03) or alternatively the plug-in power supply. Data is transferred from ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The Lacquer and Paint Testing Machine, Model 200, is a bench-mounted unit with a cast iron machine body and a cylindrical test head. Model 200 is used for the ERICHSEN CUPPING TEST in accordance with DIN ISO 1520, ISO 1520, BS 3900 : Part E4, NF T 30-019 und SIS 18 41 77 on coated sheet metal, with a tensile strength of 400 N/mm², up to 1.25 mm thick and from 70 - 90 mm wide. ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
Fully automatic cupping and deep-draw testing machine for testing the ductility of coated ferrous and non-ferrous metals (such as coil coatings, painted, plastic-coated or galvanized materials). This testing machine is electro-hydraulically driven and has a maximum pulling force of 200 kN. This testing machine is equipped with digital displays for reading the drawing and blank holding force, as ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
With the button below you can add products to a cart if you want us to do a quote for this product. The HYGROTHERM 519 is state-of-the-art technology. The operating and control operations are minimized or automated. With its large 300-litre, standard-compliant test chamber made of acid-resistant and heat-resistant plastic, the HYGROTHERM 519 is also ideally suited for continuous testing and ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The HYGROTHERM 519 is state-of-the-art technology. The operating and control operations are minimized or automated. With its large 300-litre, standard-compliant test chamber made of acid-resistant and heat-resistant plastic, the HYGROTHERM 519 is also ideally suited for continuous testing and quantity tests. The extended HYGROTHERM 519 SA humidity cabinet (with the same design) is equipped with a ...