ETI Environmental Industry Equipment
-
Manufactured by Edgetech Instruments, Inc.based in USA
The Edgetech Instruments Model ELH Series is a series of precision humidity chambers, with NIST traceable accuracies in humidity (±0.5% typical), temperature (±0.1°C) and dew point (±0.2°C). The ELH Series consist of a programmable controller for constant precision control and uniformity, and an integrated DewMaster chilled mirror hygrometer for accurate temperature ...
-
Manufactured by ETI Elektroelement d.d.based in SLOVENIA
We offer a variety of products for automation and ...
-
Manufactured by ETI Elektroelement d.d.based in SLOVENIA
ETI Code: 001214011. Description: UPO TP. Weight: 0.021kg. Level: Universal Board Covering. Type: Terminal plate. Catalogue Group: UPO Universal board ...
-
Manufactured by Environmental Technology, Inc.based in USA
The EDH–4 dehydrator addresses the need for a low cost, non-regenerating air dehydrator for pressurizing small volume waveguides and coax. It is especially suited for C, X, Ku, and Ka band applications. The output pressure is 0.5 psig (34.5 mbar) with a maximum flow rate of 6.0 scfh (2.8 lpm). It is intended for use in systems smaller than 18 cubic feet (510 liters). The EDH–4 ...
-
Manufactured by Edgetech Instruments, Inc.based in USA
The Edgetech Instruments PPM1 is a trace moisture analyzer for monitoring dew/frost point and ppmV water vapor in gases. The PPM1 is a modular, remotely mounted hygrometer configured to meet your moisture measurement application requirements. The PPM1 uses an electrolytic, phosphorus pentoxide sensor in combination with a proprietary semi permeable diffusion membrane. The principle of operation ...
-
Manufactured by Environmental Technology, Inc.based in USA
The CIT–1 Snow Sensor detects falling or blowing snow as precipitation at temperatures below 38°F (3.3°C). The CIT–1 provides the industry’s most versatile and cost effective automatic snow melting control when used with any APS or EUR series control panel, old or new.Reliability and sensitivity are key CIT–1 features. The solid state design, combined with a rugged ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
Hygrometers - The 6100 & 6102 therma-hygrometers are easy to use hygrometers, or relative humidity and air temperature measuring meters. The units measure %rh over the range of 0 to 100%rh with a resolution of 0.1 %rh and temperature over the range of -20 to 70°C with a resolution of ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
The Digital Multi-Function thermometer is compact, simple to use and displays both the temperature and the alarm set temperatures. Ideal for restaurants, bars and cafes as an economical solution for temperature measurement applications. The thermometer features a display hold facility and a max/min memory function together with an adjustable audible high/low temperature alarm. Each Multi-Function ...
-
Manufactured by ETI Elektroelement d.d.based in SLOVENIA
Home distribution boards DIDO-E are available in two types: surface mounted and flush mounted boards, in one, two or three row design. Available with transparent or white doors. With lock set installation the board can be locked. Home distribution boards can easily be built in and already have a DIN rail installed for easier and quicker mounting of module devices. Terminal blocks for PE and N ...
-
Manufactured by Edgetech Instruments, Inc.based in USA
A self-contained portable, multi-function hygrometer that accurately and reliably measures the moisture content in gases, with the battery life and ruggedness required for field ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
The Therma Waterproof thermometer is housed in a robust waterproof black ABS case which offers IP66/67 protection. The thermometer utilises state of the art electronic circuitry, designed for reliability and ease of use and can be submerged or washed under a running tap - ideal for industrial applications. The Therma Waterproof thermometer measures temperature over the range of -99.9 to 299.9 ...
-
Manufactured by Environmental Technology, Inc.based in USA
Current ADH–2A COM production uses an improved brushless single diaphragm compressor with a continuous operation life exceeding 50,000 hours in place of the original 8,000 hour brush-type unit. When operated at the recommended 10 percent cycle the new compressor increases the nominal life from 9.2 to 57.25 years. The upgrade kit directly replaces the earlier compressor with the new ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
This colour-coded Therma 20 NTC thermistor penetration probe is versatile and strong and incorporates a heavy duty, ribbed, polypropylene handle with a colour-coded end cap - please choose colour from the drop-down or colour blocks. Ideal for many temperature measurement applications including liquids, semi-solids and granular materials. Response time less than two seconds. Probe temperature ...
-
Manufactured by Edgetech Instruments, Inc.based in USA
Unlike other comparative systems RH CAL is entirely self-sufficient. It does not need compressed air or a water connection to operate, which allows this system to be truly portable. RH CAL is a microprocessor based, programmable humidity calibration system that is at home in the metrology lab or out in the field performing on site NIST traceable humidity calibrations. The system offers the ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
Stainless steel data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a waterproof, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture ...
-
Manufactured by Environmental Technology, Inc.based in USA
An automatic control system for gutters and downspouts, employs one or more GIT–1 Gutter Ice Sensors and either APS–3C or APS–4C Control Panel. Heaters operate only if moisture occurs at temperatures below 38°F (3.3°C), thus saving energy and ensuring reliable ice melting.Since the GIT–1 mounts in gutters and downspouts it senses actual environmental conditions. ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
The 7000 is a compact, general purpose moisture meter designed specifically for building professionals and tradesmen to check the moisture content in a variety of construction materials for moisture content diagnosis. The 7000 moisture meter features a 20-LED bar graph within the keypad which displays current moisture levels; green for 'OK', amber for 'WARNING' or red for 'DAMP'. The instrument ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
The 7250 is a compact, general purpose moisture meter designed specifically for building professionals and tradesmen to check the moisture content in a variety of construction ...
-
Manufactured by ETI Elektroelement d.d.based in SLOVENIA
ETI Code: 002471102. Description: ETS-16b. Weight: 0.15kg. Level: Twillight and staircase switches. Function: Monitoring and Control ...
-
Manufactured by ETI Elektroelement d.d.based in SLOVENIA
Build-in switch is used as a main switch in distribution boxes in houses or as a switch for individual electric circuits. With a build-in switch we can completely replace the cam switch. Build-in switch can be sealed either in ON or OFF position. Build-in switch has a more robust and simple construction and therefore a more reliable operation. It also shows the status of the contacts. With an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you