- Home
- Equipment
Refine by
Fluorotherm Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
PTFE is the classic, original, and gold standard of fluoropolymer tubing. PTFE was the "miracle" fluoropolymer invented in the 1940's by DuPont - a product originally without a market and hard to process. Most other materials continue to use PTFE as a reference for chemical ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
Combining the best of PTFE and FEP, PFA was developed in the late 1960's in response to a need for a resin with chemical and use temperatures closer to PTFE, yet a resin that would retain the conventional melt processability of ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
Currently, Fluorotherm offers FEP 1.3:1 shrink ratio tubing and FEP roll covers. FEP in these sizes is among the most popular heat shrink tubing product used for snug, protective jacketing for metal or other parts that are exposed to adverse, aggressive environments such as corrosion, chemicals, moisture and impact. The wide use of FEP heat shrink tubing over PTFE or PFA is due to its lower ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
Striped tubing is primarily used for easy identification of lines carrying specific fluids or intended for specific purposes. The product properties as the same as the base resin in all ...
Manufactured by:Fluorostore based inParsippany, NEW JERSEY (USA)
Currently, Fluorotherm™ offers FEP 1.3:1 shrink ratio tubing and FEP roll covers. FEP in these sizes is among the most popular heat shrink tubing product used for snug, protective jacketing for metal or other parts that are exposed to adverse, aggressive environments such as corrosion, chemicals, moisture and impact. The wide use of FEP heat shrink tubing over PTFE or PFA is due to its ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
Monofilament fiber is used in braiding applications for general industry where weaved products are produced to provide non-stick, high temperature surfaces. Here at Fluorotherm™, we can produce PTFE monofilament fiber to meet your specific needs and they are backed by our high standards of top ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
The cost-effective brother of PTFE, FEP was developed as a conventionally melt-processible fluoropolymer in response to the limitations and initial difficulties in processing ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
PVDF, or Polyvinylidene Fluoride Fluoropolymer, provides good abrasion and wear properties with low permeability. PVDF tubing is used in a variety of industries such as aerospace, semiconductor, medical, automotive, fiber optics and marine tanks. PVDF's upper use temperature of 250°F is lower than PFA; however, it is the material of choice in high purity and chemical resistance applications ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
ETFE is a fluoropolymer that is chemically and structurally similar to polyolefins such as polyethylene, thus providing a higher abrasion, impact, and crush resistance than its fully fluorinated (perfluoropolymer) counterparts -PTFE, FEP, and ...
Manufactured by:Fluorotherm Polymers, Inc. based inParsippany, NEW JERSEY (USA)
Fluorotherm’s current line of fluoropolymer rods consists of PCTFE structural rods. PCTFE is largely used for machined products for bearings, washers, gaskets, valve seats, gears and many other similar applications. Our fluoropolymer rods can be used in a wide range of industries that can ...