- Home
- Equipment
Refine by
Geobit Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Geobit Instruments based inPatras, GREECE
The C-100 is a three-component velocity equivalent output seismometer. The sensor consisted basically from three geophone elements, one per axis. When combined with our force-balance electronics (third generation), the bandwidth is extended to 10sec – 98Hz, and the sensitivity is increased to ...
Manufactured by:Geobit Instruments based inPatras, GREECE
This type of sensor has been designed for microseismic events recording during hydraulic fracturing reservoir experiments. The sensor body has been designed in order to house double geophone strings at each axis. The orientation follows the 3-axis principle. This sensor has an external diameter of 50mm allowing it to be installed into small and shallow boreholes, hence reducing the cost of ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEOtiny10 is a compact miniature digital seismometer which integrates three seismic and three acceleration channels. It supports high resolution 24bit digitizer, embedded linux OS and GPS or NTP timing. Seedlink server ensures reliable real time data telemetry while large storage volume ensures long period local data recording. The instrument has very low power consumption so it can operate ...
Manufactured by:Geobit Instruments based inPatras, GREECE
The S-100 MK3 (third generation) is a three-component velocity output seismic sensor. The design is based on the force-balance principle, thus using three simple geophone elements, the frequency bandwidth is extended from 90Hz, down to 0.1Hz. The default cable length between the sensor casing and the electronics box is approximately 20 meters but it can be extended up to150 ...
Manufactured by:Geobit Instruments based inPatras, GREECE
The GEO-S120 broadband seismometer is a product rely on years of experience in designing high precision, low noise, and reliable seismic equipment. Based on a very sensitive capacitive transducer that monitors the position of the seismic bass and a feedback loop that generates signal output proportional to velocity with extended bandwidth 120sec to 80Hz. The instrument has low self-noise so it is ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEOtiny30/60/120 is a compact miniature digital broad-band seismometer which integrates three seismic and three acceleration channels. It supports high resolution 24bit digitizer, embedded linux OS and GPS or NTP timing. Seedlink server ensures reliable real time data telemetry while large storage volume ensures long period local data recording. The instrument has very low power consumption so it ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEObit introduces GEOthree series high resolution 3+1 analog seismic channels telemetry digitizer/recorder. The size of the instrument is only 168 X 106 X 68mm. The power consumption is only 0.9W for 3 channels. Available sampling rate is 100 to 1000sps and optional lower sampling rates are supported. Built-in GPS receiver combined with ultra-accurate DPLL unit providing time drift 10e-9 sec ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEO3tiny is a compact miniature seismic digitizer which integrates three seismic and three acceleration channels plus three extra analog channels for seismometer mass monitoring. It supports high resolution 24bit digitizer, embedded linux OS and GPS or NTP timing. Seedlink and Earthworm server ensures reliable real time data telemetry while large storage volume ensures long period local data ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEObit introduces GEO-A200 high resolution and high dynamic range compact digital accelerograph. The size of the instrument is only 139mm heigh and 138mm diameter. The power consumption is less than 2W. Available sampling rate is 1 to 1000sps and optional lower sampling rates are supported. Built-in GNSS receiver combined with ultra accurate DPLL unit providing time drift 10e-9sec ensures timing ...
Manufactured by:Geobit Instruments based inPatras, GREECE
The S-100 is a three-component velocity equivalent output seismic sensor. The unit is ideal for local and regional seismicity and microseismicity monitoring as well as, for induced micro-seismicity ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEObit introduces GEOsix series high resolution 6+1 analog seismic channels telemetry digitizer/recorder. The size of the instrument is only 168 x 106 x 68mm. The power consumption is only 1.2W for 6 channels. The available sampling rate is 100 to 500sps/6ch, 100 to 1000sps/3ch and optional lower sampling intervals are supported. Built-in GPS receiver combined with ultra-accurate DPLL unit ...