- Home
- Equipment
Refine by
Grun Pumpen Environmental Equipment & Supplies
10 equipment items found
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
The feed screw (S) is dedicated for liquids of medium viscosity (200 mPas < η < 1500 mPas), if the impeller types A and R reach their limitations. With induction motor ideal combination for gentle dealing with the liquid. Recommendation: Induction motor with frequency Inverter, for variable flow ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
For transfilling and draining of drums and containers. Version A for high flow rate. Version R for high pressure, with foot valve for complete ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
Faster- cheaper - hassle-free! With discharge tube or nozzle. Applications: general: non-flammable liquids, acids and basis low concentrated, fluids of medium viscosity (colours, emulsions, dispersions, suspensions, oils). extra liquids: inflammable liquids when ATEX is not required (special laboratory conditions) pumping heavy and viscous liquids only in small quantities, motor temperature is ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
SL-PVDF: For transfilling and draining of drums and containers. The perfect drum pump for the most thin liquids. Version A for high flow rate, Version R for high pressure, with foot value for complete Drainage. Recommendation: For heavy liquids DL-PVDF-R and the strong motor ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
For transfilling and draining of drums and containers. Version A for high flow rate. Version R for high pressure. with foot valve for better ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
MP-SL-Stainless steel: For stiring of emulsions, dispersions, suspensions bevor starting the transfilling action. The mixing drum pump is fitted with mixing apertures. By moving a sliding sleeve with a Lever, These holes can be opened or closed. "Open" is for mixing inside the drum and "Closed" is for pumping out of the drum. All this can be achieved with one ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
The feed screw (S) is dedicated for liquids of medium viscosity (200 mPas < η < 1500 mPas), if the impeller Types A and R reach their limitations. Ideal combination with induction motor for gentle dealing with the liquid. pd500-1 0,37 KW 230 V: 500-0042, pd500-3 0,37 KW 400 V: 500-0039, Ex-proof Motors on ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
For transfilling and draining of drums and containers. The perfect drum pump for the most thin liquids. Version A for high flow rate, Version R für high pressure, with foot valve for complete drainage. Recommendation: SL-PP-R-HC with motor p400-A. *with drive shaft hastelloy C (HC) there are no problems with aggressive ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
MP-SL-PP: For stirring of emulsions, dispersions, suspensions before starting the transfilling action. The mixing drum pump is fitted with mixing apertures. By moving a sliding sleeve with a lever, these holes can be opened or closed. "Open" is for mixing inside the drum and "Closed" is for pumping out of the drum. All this can be achieved with one unit. Recommendation: For a good stirring efford ...
Manufactured by:grun-pumpen gmbh based inAlzenau, GERMANY
The right eccentric screw pump for tough and highly viscous liquids. The light series. Works fast and is almost as light as a feather. Push the picture to download data sheet for light series SB-ds. The robust series. Pump everything that still flows. With follower plate, even if it does not flow. Suitable for following applications: stationary use. Push the picture to download data sheet for ...