- Home
- Equipment
Refine by
Hydranautics Environmental Equipment & Supplies
14 equipment items found
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
ESNA membranes by Hydranautics are designed using the latest technology and exhibit unparalleled performance at ultra-low pressures. Ideal for softening applications and removal of pesticides and pathogens, ESNA membranes provide 50-90% salt rejection. ESNA membranes also remove iron and TOC (Total Organic Carbon), while allowing passage of monovalent ions like sodium and chloride. This makes ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
PRO-XP are ultra high-pressure RO membranes which can can treat high TDS feed water and concentrate it up to 120,000 ppm (12%) while operating at pressures up to 1,800 psi (12.4 MPa). In a ZLD system, the PRO-XP is applied upstream of evaporators, to reduce the CAPEX and OPEX of downstream thermal equipments. PRO-XP increases the overall efficiency of the treatment facility by reducing the cost ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
ESNA1-LF-LD are high-performance nanofiltration membranes ideal for softening applications and removal of pesticides, bacteria and viruses. They provide 50%-90% salt rejection with ultra-low-pressure operations, increased energy savings, and significantly lower installation and operating ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
LFC3-LD from the LD Technology innovative low fouling membranes combines the attributes of a neutrally charged surface with hydrophilicity to achieve the lowest organic and colloidal fouling in the most demanding feed water ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
The NANO-SW nanofiltration membrane product line is primarily used in the oil and gas industry. These membranes are high-performance nanofiltration membranes which are able to selectively remove sulfate, thereby reducing the risks of scaling and reservoir souring when seawater is injected into the oil containing reservoirs for secondary oil production in offshore production. The membrane rejects ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
ESPA1 membrane has the same chemistry as the ESPA2 membrane but has a higher permeability. ESPA1 membrane requires even lower feed pressures than ESPA2 and the energy consumption is also lower. ESPA1 is popularly used in the treatment of low TDS waters to produce potable water. ESPA1 membrane is available in diameters of 4.0 and 8.0 inches. The 4.0 inch diameter membrane is available in Low ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
NANO-BW are high performance nanofiltration membranes ideal for treatment of low salinity surface or ground waters containing high molecular weight organics or pesticides. They provide 50%-90% salt rejection with ultra-low-pressure operations, increased energy savings, and significantly lower installation and operating ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
PRO-XS are charged nanofiltration membranes with high ion selectivity which provide high rejection of bivalent cations and anions to selectively remove and concentrate the ions to produce industrial grade chemicals like Glauber’s salt, hardness free NaCl, Na2CO3 etc. The ability to separate salts in the brine helps to reduce the amount of mixed salt wastes going to landfill and the purified ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
SWC4 are the highest salt rejecting membranes used to treat varying levels of seawater salinities and produce low TDS permeate. SWC4 is popularly used in the treatment of sea and highly brackish waters. SWC4 membranes are available in two different types of variants, LD and MAX. Low differential LD Technology® models are offered to minimize colloidal fouling when used with conventional ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
PRO-LF are spiral wound RO membranes which are neutrally charged and have a hydrophilic coating to minimize fouling while treating high salinity wastewaters. The resistance to fouling exhibited by PRO-LF membranes is an important feature in the treatment of industrial wastewaters from coal to chemical plants, mines, tanneries and textile ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
The energy required to pressurize RO feed water is the largest contributor to the total energy consumption of the RO plant. ESPA membranes are the choice for applications demanding high-energy efficiency, with uncompromised productivity and salt rejection. Operating at significantly lower pressures, ESPA elements produce high quality water in a range of water treatment applications, ensuring ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
PRO-XR supplies the best combination of high rejection and high flow capability at low pressures, compared to all commercial low-pressure type RO elements. PRO-XR membranes are useful in industries where high-purity water is critical like power generation, electronics, semiconductor, pharmaceutical and food & ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
CPA2-4040 is a high rejection RO membrane, available in a diameter of 4 inches. Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power ...
Manufactured by:Hydranautics A Nitto Denko Company based inOceanside, CALIFORNIA (USA)
These are HYDRACoRe10 and HYDRACoRe50 membranes made as a traditional RO style fiber glass element with a low fouling brine spacer used to treat industrial, food and beverage and municipal feed waters. These come in 4 inch and 8 inch diameter ...