- Home
- Equipment
Refine by
Inkwer Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
For greater diameters than Ø250 mm, please consult our Technical Department. Standard connection material is St37 Carbon Steel. According to the requirement, it can be possible to produce stainless steel materials such as AISI 304, AISI 316, AISI 321 or ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
For greater diameters than Ø250 mm, please consult our Technical Department. Standard connection material is St37 Carbon Steel. According to the requirement, it can be possible to produce stainless steel materials such as AISI 304, AISI 316, AISI 321 or ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
For greater diameters than Ø250 mm, please consult our Technical Department. Standard connection material is St37 Carbon Steel. According to the requirement, it can be possible to produce stainless steel materials such as AISI 304, AISI 316, AISI 321 or ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
Fan - coil connectors are used for flexible connections of fan - coil units to the heating / cooling system distribution ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
Sprinkler system, when the fire starts to spray water to the blaze automatically and control the fire in fixed place or extinguish. These systems are installed on the ceiling and takes water from the main fire pipeline. Sprinkler system prefered when the area is difficult to reach or in the dangerous place. Sprinkler connection hoses, braided flexible metal hoses that provide the connection ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
Valve jackets are used to minimize heat loss through pipe line armatures and to prevent steam and density made through cooling system and to increase the system productivity. The maximum temperature allowed for the insulation fabric in standard jackets is approximately 280 °C. The fabrics which can resist to temperature up to approximately 850 °C are used for the special ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
For greater diameters than Ø250 mm, please consult our Technical Department. Standard connection material is St37 Carbon Steel. According to the requirement, it can be possible to produce stainless steel materials such as AISI 304, AISI 316, AISI 321 or ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
16 bar pressure, 110 °C temperature. Rubber bellows is consisted of special rubber, steel wire and reinforced nylon-cord. Good solution for vibration, noise and dilatation problems. Absorption of axial, lateral, angular and transverse movements. Easily installation with its floating flanged. Joints and seals are not ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
Their assembly is easy and can be handled in a shorter time period. They are flexible and capable of moving in every directions. Absorbs also the thermal movements. Only one support is ...
Manufactured by:Inkwer A.S. based inTuzla, TURKEY
Fabric expansion joints are designed to minimize the mechanical movements by seismic, the stress and the mounting defects occurred through the pipe lines by having loaded high thermal dilatation and vibration on itself. There are four necessary components in projecting a fabric expansion joints ; Temperature, Pressure, Environment, and Chemical ...