- Home
- Equipment
Refine by
Isti Environmental Equipment & Supplies
5 equipment items found
Manufactured by:ISTI - Instrumental Software Technologies, Inc. based inSaratoga Springs, NEW YORK (USA)
GEObit provides compact solutions for quick-deploy seismic stations based on the GEOThree digitizer/recorder and C100 sensor. The GEOThree recorder has 3 input channels and integrated sensor electronics. The digitizer is based on a powerful, wide dynamic range 32bit delta-sigma analog-to-digital converter, with very low noise characteristics and excellent power supply rejection. The sampling rate ...
Manufactured by:ISTI - Instrumental Software Technologies, Inc. based inSaratoga Springs, NEW YORK (USA)
The SM550 and SM1500 (Fig. 4 - 6) are two MEMS type, three-component acceleration sensors. Both have wide frequency response. The SM1500 model provides response from DC to 750 Hz, while the SM550 model provides response from DC to 50 Hz. Many output ranges are available for both models: +/-2 g, +/-4 g, +/-5 g, +/-6 g, +/-10 g, +/-12 g. Default sensitivity is 2.4 V/g for the SM1500, and 1.2 V/g ...
Manufactured by:ISTI - Instrumental Software Technologies, Inc. based inSaratoga Springs, NEW YORK (USA)
The GEOfba200 (Fig. 1 - 3) is a very low-noise triaxial force-balance accelerometer with a large dynamic range, suitable for seismology, hazard mitigation and civil engineering applications. The instrument has both a flat response to ground acceleration from DC to 215 Hz and a stable phase response within the passband. Output range is 40Vpp differentially and supports variety range of gain sets ...
Manufactured by:ISTI - Instrumental Software Technologies, Inc. based inSaratoga Springs, NEW YORK (USA)
GEObit introduces the GEOsix series high-resolution 6+1 analog seismic channels telemetry digitizer/recorder. The size of the instrument is only 168 x 106 x 68 mm. The power consumption is only 1.2 W for 6 channels. The available sampling rate is 100 to 500 SPS/6ch, 100 to 1000 SPS/3ch, and optional lower sampling intervals are supported. A built-in GPS receiver combined with an ultra-accurate ...
Manufactured by:ISTI - Instrumental Software Technologies, Inc. based inSaratoga Springs, NEW YORK (USA)
GEObit introduces the GEOthree series high resolution 3+1 analog seismic channels telemetry digitizer/recorder. The size of the instrument is only 168 X 106 X 68 mm. The power consumption is only 0.9 W for 3 channels. The available sampling rate is 100 to 1000 SPS and optional lower sampling rates are supported. A built-in GPS receiver combined with an ultra-accurate DPLL unit, providing time ...