- Home
- Equipment
Refine by
Lankelma Environmental Equipment & Supplies
9 equipment items found
by:Lankelma Limited based inIden, UNITED KINGDOM
The piezocone test (CPTu) is a cone penetrometer deployed during a CPT which simultaneously measures cone tip and friction sleeve resistance, inclination and excess pore water pressure. The addition of pore water pressure measurements allows for a more reliable determination of soil stratification and soil type than standard CPT (cone tip and sleeve resistance only). This provides a better basis ...
by:Lankelma Limited based inIden, UNITED KINGDOM
The Vibrating Wire Piezometer (VWP) uses a vibrating wire pressure transducer to accurately measure the pore water pressure of the ground by responding to changes in water pressure. This installation is suitable for use in all soil types, with the readings obtained either by a read-out, terminal unit or data ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Lankelma’s C-5 Jack-Up Platform Sandpiper allows geotechnical drilling, borehole investigation and CPT testing in waters up to 15m depth. The 18m by 12m platform is modular, allowing it to be transported by road, with the pontoons assembled on site using a simple coupling system. This makes it ideal for easy handling and assembly in remote locations, where conventional equipment cannot be ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Lankelma have three fully tracked rigs, our rubber tracked ‘bog skipper’ rig, our steel tracked box rig and our latest addition to the fleet, our hybrid plug-in electric ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Lankelma’s four track-truck mounted rigs provide CPT services nationwide. These rigs are are self-contained HGVs capable of being jacked up on their tracks to cope with soft or uneven ground on ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Lankelma owns the world’s first dedicated CPT rail truck that can test within the rails four-foot or six-foot, and an excavator mounted unit that test in the cess, four-foot and ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Inclinometer systems are used to monitor deformation in the ground. The technique involves installing plastic inclinometer casing in a near vertical borehole that passes through a zone of suspected movement, with the bottom of the casing anchored in stable ground. The inclinometer probe is then used to measure movement of the casing from its original position over time and hence measure any ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Standpipe piezometers are a simple, reliable and relatively inexpensive way of monitoring the piezometric water level over time. They typically consist of a porous tip at its lowest point and riser pipes that connect the tip to the surface, although porous pipes can also be connected to the riser pipes if certain beds are of ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Lankelma’s insitu bladder pump water sampler allows for a groundwater sample to be taken using CPT equipment in as little as an hour. When compared with conventional water sampling in boreholes, our CPT push water sampler is not only faster but also ...