- Home
- Equipment
Refine by
Logiball Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiplug inflatable sewer plugs can be used in a wide variety of applications such as by-pass pumping, flow control and flow diversion. Logiplug pneumatic plugs can be used for completely stopping water flow when the flow-thru is plugged ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball multisize high/low flow inflatable sewer plugs provide optimal flow control during CCTV inspection, lateral reinstatement, or sectional lining operations. By keeping the sewer flow active, controlled, and at a manageable level, these plugs allow downstream work to proceed without fully blocking the line and without requiring bypass pumping. The active flow is regulated from above ground ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
The Push-Type Test Rig is designed for segmental air testing of lateral lines from a cleanout or other above-ground access point. The standard test chamber, located between the two inflatable bladders, measures 5 feet in length. A ¾-inch semi-rigid hose serves both as the push rod and as the inflation line for simultaneously inflating both bladders. The test chamber is pressurized through a ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball 2001L packers are used to test and seal off infiltration in sewer laterals, from the mainline, without any access to ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Design allows to seal laterals connected to manholes. Injections have been done up to 30 feet. Logiball Man Entry Pipe Lateral Grouter is an inflatable bladder with threaded adapter used to install our standard lateral grouting plugs to seal laterals from a man entry pipe or a manhole. It includes one inflation port for the lateral bladder, one inflation port for the 4″-6″ bladder, ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball 2001J Mainline Packers are engineered to meet the highest standards for testing and sealing mainline sewer pipe joints using acrylamide, acrylate, or urethane gels. A thick, reinforced SBR rubber sleeve is bonded to the stainless-steel core, with an additional layer of softer rubber applied over the seating area to ensure superior contact and sealing, even against rough surfaces. The ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
The Logiball Securimax inflatable pipe plugs are designed with high safety factors such as a two ply cross-biased reinforced SBR rubber sleeve, anchoring device and end plate retaining device for a maximum ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball Elliptical Mainline test and seal injection packers are custom-made for the exact pipe dimensions and the available access to the storm sewer ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball push-type inflatable rubber plugs are available with or without flow-through capability for pipe diameters ranging from 3 to 6 inches. These flexible plugs can be inflated and pushed from the cleanout using the optional semi-rigid hose assembly, allowing for quick and efficient ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball lightweight inflatable type E plugs are your best option for submerged pipes and short sections of pipes. Each plug is factory-tested at the factory at twice the recommended inflation ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Logiball multisize dual-seal inflatable plugs are designed to isolate and test the annular space of dual-containment piping systems. Their donut-shaped profile allows them to easily slide between the carrier pipe and the containment pipe, making them the fastest and most cost-effective solution for low-pressure air testing. Once positioned between the two pipes, the plugs are inflated. This ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
The larger flow-through rigid carriers are commonly used for installing short mechanical repair sleeves. Manufactured from high-quality SBR rubber and lightweight aluminum, they feature oversized flow-through openings and large wheels to ensure smooth, effortless movement down the pipe. Cores can be fabricated from steel, aluminum, or stainless steel, depending on the application. Custom-made ...
Manufactured by:Logiball Inc. based in, QUEBEC (CANADA)
Collapsible Mainline Packers are designed for testing and sealing pipe joints 24 inches and larger. These injection grout packers can be fully dismantled to pass through openings as small as 21 inches in diameter, then quickly reassembled once inside the pipe. A soft natural-rubber sleeve is securely fixed to the support shell, covering both end bladders to ensure optimal seating and sealing, ...