- Home
- Equipment
Refine by
Mainline Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Sparling Instruments, LLC based inEl Monte, CALIFORNIA (USA)
For over 100 years, Sparling’s Mainline direct drive propeller flow meters have earned a reputation as a rugged, continuous duty, flow measurement device that requires minimal maintenance. The FM102/FM182 line of direct drive propeller meters continues that ...
Manufactured by:Sparling Instruments, LLC based inEl Monte, CALIFORNIA (USA)
The Sparling FM-104/184 MainLine™ electronic propeller flow meter features fewer moving parts and a rugged Sparling design for longer life and reduced maintenance ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
The Test Eze Tee was produced because there was a need for a safe, economical, and easy to use method for pressure testing DWV drainage systems. The Test Eze Tee can be used for extendible or non extendible pressure testing, horizontal and vertical pressure testing. This fitting is available for 3” pipe with a 4” riser for extendible applications. The test gate is a disc with an ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
Provides an Easy and Decorative. Finish for Any Building Penetration. Made from white UV protected PVC (paintable and will not rust, rot, swell or peel). Neoprene rubber gasket seals to wall & around pipe penetration. Can be used on any plumbing, heating or electrical wall ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
The Mainline Top-Gate Valve has been designed to provide complete protection and minimal maintenance with it's revolutionary ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
An Inspection Chamber is a clean-out generally installed at the property line of a building. It allows the municipality or city to access the sanitary or storm sewers without disturbing the building owner. The municipality or city can service the laterals to the building with cleaning equipment for blockages or they can camera the lateral for inspection ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
Flush Cap Cleanouts are internal fitting caps that allow for a flush finish on both indoor and outdoor installations. They provide a sealed access point to the plumbing system and eliminate the need for access boxes or access openings in the floor. Available in 4” & 6” (ABS and PVC), Flush Caps are an ideal finish to any Adapt-a-Valve or Straight-Fit valve ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
The Pipe Plug is a safe and economical way to pressure test DWV drainage systems. Pipe Plugs can be used for horizontal or vertical testing applications. They simply slide into the cleanout and once pressure testing is complete, they ‘tear’ out of the system by pulling on the cord attached to the pull tab. Quick and efficient as well as affordable. Pipe Plugs come in 3” and ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
The ML-4963 valve has a patented 'normally open' design to allow for free circulation. The clear lid provides ease for visible inspections. The valve has a built-in main sewer cleanout for rodding and ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
Unlike other valves this valve has a minimal fall 3/8" through the body which means it's easier to install. Simply cut out enough pipe for valve and simply drop in and connect to plumbing system. This can be done in as little as 24"of excavation, if utilizing existing building cleanout. All other valves have greater falls through the body and require at least 4-5 feet of concrete breaking just to ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
Mainline Top-Check valve features a top suspended gate which stays forever clean. The clear lid & cleanout provide ease for visible inspections and sewer rodding. Manual sewer shut off provides owner option to manually close their ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
Termex Valves are available in 4” and come in both the normally open gate design or normally closed. They can be used in many applications such as septic tanks, storm water retention ponds, lift stations and more! They are made of rugged PVC with an ABS gate. Extendable Termex valves are available in 3”, 4” & 6” DWV in both ABS and ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
Protects against radon gas & easily integrates with your vapor barrier system. Seals against groundwater flooding through ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
The Straight-Fit Backwater Valve features a patent pending flapper, designed to smoothly guide cleaning and surveying equipment through the BWV, also allowing for safe withdrawal of the same, minimizing risk of damage to the flapper. The addition of a Smart- Curve snake guide also prevents damage to the valve body during snaking from the main access. The Straight-Fit Valve body design has minimal ...
Manufactured by:Mainline Backflow Products (Can) Inc. based inEdmonton, ALBERTA (CANADA)
The Adapt-a-Valve Extendable Backwater Valve was invented because there was a need to have easy access to enable servicing of backwater valves deeper than 2 feet. The only other options were expensive and unsightly ‘vaults’ or ‘access culverts’ in which someone had to crawl down to service the backwater valve. Another option, which was strictly against code but done by ...