- Home
- Equipment
Refine by
Northcoast Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Features: Round opening. Rising stem. Cast iron or bronze seating surfaces. Cast iron frame, slide. Flat or spigot back. Unique wedging action. Galvanized steel guides and seat ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Features: Wall or tank mounted. All aluminum construction. Extruded aluminum rails. Available in stainless ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Features: Non-rising and rising stem types. ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Materials and Construction: Frame, Slide and Reinforcing Members. Stainless Steel, ASTM A276 Type 304 or 316. Stems - Stainless Steel, ASTM A276 Type 304 or 316. Fasteners - Stainless Steel, ASTM F593 Type 304 or 316. Rubber Seals - Neoprene, ASTM D2000. Guide Bars: Ultra High Molecular Weight Polyethylene, ASTM ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Materials of Construction: Body - Ci 30 Grey Iron. Lid - CI 30 Grey Iron. Seal - Buna - N. Grate - CI 30 Grey Iron. Pin - Stainless ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Materials and Construction: Frame, Slide and Reinforcing Members. Aluminum, ASTM B209 Alloy 6061. Stems - Stainless Steel, ASTM A276 Type 304 or 316. Fasteners - Stainless Steel, ASTM F593 Type 304 or 316. Rubber Seals - Neoprene, ASTM D2000. Guide Bars - Ultra High Molecular Weight Polyethylene, ASTM ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Frame, Slide and Reinforcing Members - Stainless Steel ASTM A276, Type 304 or 316. Stems - Stainless Steel, ASTM A276 Type 304 or 316. Fasteners - Stainless Steel, ASTM F593, Type 304 or 316. Rubber Seals - Neoprene, ASTM D2000. Guide Bars - Ultra High Molecular Weight Polyethylene, ASTM ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Slip Tubes: The valve slip tube shall be of seamless brass, stainless steel or PVC with a minimum wall thickness of 1/8' to prevent corrosion and to ensure proper operation at all times and arranged to slide inside of the sludge draw-off pipe as shown on the drawings. The valve shall have two V-notched weirs located 180 degrees ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Stop log grooves shall be of aluminum type 6061 with integral tabs for either channel mounted or embedded ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Guides: Stop gate guides shall be of aluminum type 6061 alloy and be either wall mounted, face mounted or embedded ...