- Home
- Equipment
Refine by
Novalynx Environmental Equipment & Supplies
25 equipment items found
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 110-WS-25 Modular Weather Stations are meteorological systems designed to be a "user friendly" solution for data storage and real-time monitoring of weather conditions. The standard sensor package includes 6 weather parameters: wind speed and direction, temperature and relative humidity, barometric pressure, and precipitation, (additional optional sensors can be added), a 5-foot tripod and ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 230-276 Barometric Pressure Sensor is an extremely accurate and stable transducer based on the Setraceram sensing element. This glass fused ceramic capacitive sensing capsule is the heart of this environmental pressure transducer because of its inherent thermal stability, low hysteresis and fundamentally simple design. ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 200-WS-21-A Dual Set Point Wind Alarm is a microprocessor-based wind alarm system. It sounds an alarm and controls the operation of two electrical relays whenever wind speed reaches either of two independently user selected limits. It has 0 to 100 mph wind speed measurement and alarm range. A liquid crystal display provides a readout of the measured wind speed, maximum wind speed, and it is ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 210-301 Temperature Sensor is a three-terminal integrated circuit sensor whose output voltage is linearly proportional to the Fahrenheit temperature. This sensor does not require any external calibration or trimming to provide typical accuracy of ± 0.5°F at room temperature and ± 1.5°F over the full 0-120°F temperature range. It operates from 5-30 Vdc and has a linear 10mV/°F output. With a ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 380-280 Solar Radiation Shield is a low cost solution for protecting temperature and relative humidity probes. It consists of four molded plastic plates and a powder coated aluminum mounting arm. The wedge-shaped plates provide maximum airflow around the probe while at the same time minimizing direct exposure of the probe tip to sunlight. The shield is shaped to allow natural air convection ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 255-100 Analog Output Evaporation Gauge is used to determine the evaporation rate by measuring the changing water level in an evaporation pan. The sensor consists of a float, pulley, and counterweight attached to a precision 1000-ohm potentiometer mounted in a weatherproof housing. The potentiometer produces a resistance output proportional to the position of the float which can be monitored ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 380-283 Fan Aspirated Solar Radiation Shield includes a solar powered fan mounted on top of the shield. The shield is designed with a highly reflective white surface to reflect the sun's direct radiation. It is constructed of powder coated aluminum and consists of a flat deflection plate, three wedge-shaped plates, and a mounting arm. The wedge-shaped plates provide maximum airflow around the ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 255-212 Min-Max Thermometer can be configured as either a floating or submersible thermometer for measuring the minimum and maximum temperatures of water, such as in an evaporation pan. It features a digital thermometer mounted on a non-magnetic base. The built-in solar radiation shield protects the thermometer against direct ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 230-M2000 Handheld Digital Barometer is a portable pressure instrument with flexible features to meet many of your everyday pressure measurement needs. This device features an easy and intuitive user interface with convenient pressure ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 260-WS-2501 Data Logging Rain Station is a battery-powered rainfall data collection and recording system consisting of a battery-operated event logger with built-in display and an 8" tipping-bucket rain ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 260-2500 Tipping Bucket Rain Gauges are dependable instruments used for measuring precipitation. Rainfall entering the 8" or 12" funnel collector is directed to the tipping bucket assembly. When an incremental amount of precipitation has been collected, the bucket assembly tips and activates a magnetic reed switch. The sample is discharged through the base of the gauge. A momentary electrical ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 260-2510 Standard Rain and Snow Gauge is an all-aluminum rain gauge with a total capacity of 20" of rainfall. The upper portion of the funnel is cylindrical in shape and is turned to a fine edge. Rainwater falling into the funnel is delivered into the receiver. The ratio is 10 to 1, so that 1" of rainfall delivers 10" of water to the receiver. The capacity of the receiver is 2" of rainfall. ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 230-600 Series Barometric Pressure Sensors offer unparalleled performance and flexibility for atmospheric pressure measurement. The barometer is available in two configurations to satisfy a variety of applications; Model 230-600C provides a 4-20 mA current output, 230-600V provides 0-5 Vdc output. Both models offer serial output in addition to the analog signal. ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 230-WE100 Barometric Pressure Sensor covers a pressure range from 800 to 1100 mb. It is fully temperature compensated within an operating range of -40 to 65 degrees Celsius. The output is 4-20 mA with a two-wire current-loop ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 230-278 Barometric Pressure Transducer is designed for use in environmental applications that require excellent accuracy, fast dynamic response, and long-term stability and reliability. To withstand the environmental extremes typically found in Automated Weather Station (AWS) and environmental monitoring applications, the 230-278 housing is constructed of stainless steel and ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 110-WS-16BP Barometric Pressure Sensor uses a piezoresistive sensing element which responds to changes in barometric pressure with a corresponding change in resistance. This resistance is converted to a voltage from which a microprocessor (or another data processor) calculates the barometric pressure at the elevation where the barometer is ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 255-110-B Evaporation Gauge Tester works with the 255-100 Evaporation Gauge to provide a direct reading in inches or millimeters, corresponding to the output from the evaporation gauge. The tester is used to set-up the evaporation gauge during initial installation and can be used to provide a direct reading of daily evaporation ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 255-620-A Automatic Refill System provides a simple method to automatically refill an evaporation pan at specified times. It consists of an electronic water timer and an automatic float valve. The water timer switches on at a user-specified time, allowing water from an external water source to flow into the pan. Works with low (gravity flow) or high (city) water pressure. The float valve will ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 255-704-B Evaporation Logger is a voltage data logger that connects to the 255-100 Analog Output Evaporation Gauge to provide a recorded history of the evaporation pan level. Optional air and water temperature sensors can be connected to the logger to record temperature readings along with pan level. The data can be useful in a wide range of fields such as agriculture, water and waste ...
Manufactured by:NovaLynx Corporation based inGrass Valley, CALIFORNIA (USA)
The 380-281 Solar Radiation Shield is designed with a highly reflective white surface to reflect the sun's direct radiation. It is constructed of powder coated aluminum and consists of a flat deflection plate, three wedge-shaped plates, and a mounting arm. The wedge-shaped plates provide maximum airflow around the probe while at the same time minimizing direct exposure of the probe tip to ...