- Home
- Equipment
Refine by
Ocv Environmental Equipment & Supplies
9 equipment items found
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The Model 8101 is applicable anywhere it is necessary to automatically control the high level in storage tanks where the float pilot can be mounted inside the ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The OCV Basic Control Valves 65 Globe and 65 Angle are full port engineered valves. When equipped with a variety of pilots and accessories, these valves perform a wide range of automatic fluid control, making them specified valves in municipal water, fire protection, irrigation, industrial, petroleum and aviation fueling systems. The Model 65 is dependable and hard working; with a simplicity ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The Model 1330FC is a pressure relief valve that is installed downstream of a pressure reducing valve and is located in the distribution piping in a fire protection system. If the pressure in the distribution piping should become over pressurized, the 1330FC will open and relieve the excess pressure, preventing ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The Model 108-2HP automatically relieves excess fire pump discharge pressure to prevent the pressure from exceeding the rating of the fire system components. It is specifically designed for those systems where the relief set point must be higher than the pressures allowed for UL-listed/FM-approved ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The Model 8104 is applicable anywhere it is necessary to automatically control the high level in storage tanks where the float pilot can be mounted inside the tank. ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The Model 8106 is applicable anywhere it is necessary to automatically control the high level in storage tanks with floating pans, requiring that the float control be mounted on the exterior of the tank. ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
Our 74FC Deluge Control Valves are designed specifically to be used in deluge, pre-action, foam-water and other special systems. The 74FC Series is UL Listed for deluge service in globe pattern for sizes 3” through 10” (DN80 through DN250). The 74FC Series is a simple on-off valve that utilizes an innovative oval design to optimize flow capacity, minimize head loss and provide ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The Model 108-2SLF automatically relieves excess foam pump discharge pressure to prevent the pressure from exceeding the rating of the fire system components. The engineered SLF (sense line flush) feature assures accurate pressure control by continuously flushing the pilot sensing chamber (flow through ...
Manufactured by:OCV Control Valves based inTulsa, OKLAHOMA (USA)
The OCV Series118/108SA surge anticipation valves are designed to be installed in a bypass line and provide protection against damaging surges that can occur in pumping systems when a pump is suddenly stopped. Unlike conventional relief valves, which open only when a high pressure wave hits, surge anticipation valves sense the precursor of the high pressure wave (pump power failure or low ...