- Home
- Equipment
Refine by
Plasti Fab Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Plasti-Fab offers standard sizes of corrosion resistant, fully-insulated shelters for instrumentation, controls, chlorination, sampling and communications. Also referred to as walk-in enclosures, Plasti-Fab offers standard sizes of corrosion resistant, fully-insulated shelters for instrumentation, controls, chlorination, sampling and communications. Having the same general benefits of our larger ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Flexible neoprene flap gate is the answer for applications requiring corrosion resistant equipment suitable for sea water and most low pH water. Simple construction and light weight make installation and maintenance easy. The flap gate’s molded body of reinforced copolymer has a 125 lb. pattern flange and a molded neoprene flap which also acts as a hinge. The flexible flap with molded-in ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Reduces velocity in flow to increase accuracy of flow measurement.. Drop in place installation is fast and efficient.. Self Cleaning Design.. Integral Manhole and Energy baffle system. Manhole barrel has white gel coated interior to maximize available light and sanitation.. Design Features and Accessories. Manholes available with: Full Hinged Lid. H-20 Rated Cone Top. Aluminum Gas Tight Lid. ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
The H flume and related HS & HL flumes are gaining in popularity due to their ability to handle wide ranging flows that can vary by as much 100:1 or more from low to peak. Because of the unique throat, which resembles a weir in some respects, the H flumes provide excellent resolution at low flows and still have capacity to capture peak flow readings on many 15 to 25 year storm events. H ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Trapezoidal flumes fall into two principal groups, 60º V-notch flumes and larger trapezoidal flumes. The 60º V flumes have a sharp V-throat section similar to a V-notch weir and produce superior resolution for accurate flow measurement down to 1 gpm. The larger trapezoidal flumes, up to the 2 foot SRCRC flume, have flat floors and sloping sidewalls and can handle flows up to 32 MGD. ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
The Palmer-Bowlus flume is well know in the sanitary field, and has been used in the Los Angeles area for over 60 years. It’s primary application is in pipelines, in round bottom channels or in manholes where it is often preferred because of cost and ease of installation that can minimize construction ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Stop Gate and Stop Plate are interchangeable terms used to identify manually lifted gates that are installed in open channels. Stop gates are normally either in or out and do not include a stem or lifting mechanism. Smaller gates or gates with a balance (equalized) head can usually be raised by hand. Larger gates and gates with unbalanced head often require a mechanical lifting device such as a ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Industrial Slide gates are commonly used in open channel and moderate head applications to isolate equipment, divert flow, close off a wall opening, or cover a pipe that is flush with the wall. Plasti-Fab slide gates are manufactured of gray fiberglass reinforced plastic containing ultraviolet inhibitors. Plasti-Fab penstock is reinforced to withstand the specified maximum operating head. Where ...
Manufactured by:Plasti-Fab EPS Product Solutions based inCalgary, ALBERTA (CANADA)
PlastiSpan Insulation is a Type 1, moulded expanded polystyrene (EPS) insulation with an R-value of 3.75 per inch and compressive resistance of 10 psi. PlastiSpan is a versatile insulation product that can be used in a wide range of applications. PlastiSpan EPS is a closed cell, rigid foam plastic insulation that maintains its R-value for the life of the product. When applied as continuous ...
Manufactured by:Plasti-Fab EPS Product Solutions based inCalgary, ALBERTA (CANADA)
DuroSpan 250 insulation is a Type 3, closed cell and moisture resistant insulation. With an R-value of 4.27 per inch, the product boasts the same durability and flexibility as other DuroSpan products, with a compressive resistance of 25 psi. It is easy to install and can be used in many applications such as exterior sheathing, continuous insulation, basement floor, under slab insulation and ...
Manufactured by:Plasti-Fab EPS Product Solutions based inCalgary, ALBERTA (CANADA)
DuroSpan GPS R5 Insulation Board is a higher R-value product with an R-value of 4.7 per inch manufactured with NEOPOR – a graphite enhanced polystyrene. GPS is a closed cell insulation with a silver-gray colour that meets or exceeds requirements for expanded polystyrene (EPS) manufactured to CAN ULC ...
Manufactured by:Plasti-Fab EPS Product Solutions based inCalgary, ALBERTA (CANADA)
EnerSpan is a moulded graphite polystyrene (GPS) rigid foam insulation that gives maximum efficiency, cost-effectiveness and sustainability to your insulation projects. EnerSpan is manufactured using Neopor® provided by BASF, a graphite-enhanced raw material that reduces radiation heat transfer resulting in higher thermal resistance (R-value) compared to standard CAN ULC S701.1, Type 1 EPS ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Composite FRP is extremely resistant to chemicals, saltwater, corrosive soils, ground water and electrolysis. Weighs only a fraction of concrete and steel structures. Strong – FRP is pound-for-pound much stronger than steel. Flumes with precise throat dimensions for accurate flow measurement. Premium grade Isophthalic white gel coat interior to resist bacteria and maximize. illumination ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
Divert flow as needed to separate downstream locations. Drop in place installation is fast and efficient. Manual or remote gate operation. Complete packaged integral manhole and diversion gate system. Manhole barrel has white gel coated interior for luminesce and sanitation. Composite FRP is extremely resistant to chemicals, saltwater, corrosive soils, ground water and electrolysis. Strong ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
The Wedging Titeseal Slide Gate is commonly used as an emergency shutoff gate. Developed and patented by John Vitas at Plasti-Fab, it is the tightest sealing slide gate available on the market today. The Wedging Titeseal® design is capable of reaching extremely low leakage rates: less than 100 cc/min/foot of wetted perimeter. This is 4 to 5 times lower leakage than permitted by AWWA C-501, ...