- Home
- Equipment
Refine by
Prm Environmental Equipment & Supplies
20 equipment items found
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
PRM 2.5 Inch Pressure Gauge 304 Stainless Steel case, Brass 1/4" NPT Back (0-30" ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
Banded Top Bag Filter Housings for remediation and industrial filtration needs. Units come standard in 304 stainless steel with Viton O-Rings. Standard Model uses 2mm Stainless Steel and Premium Model uses 3mm Stainless ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM manufactures Plate Clarifiers for enhanced solids removal from process streams. The raw process water enters the clarifier where it is dispersed evenly through the chamber. The collection surface of the plates allows solids to slide downward to the sludge hopper for removal while the clarified effluent exits the unit through the effluent outlet. Plate Clarifiers can be used in conjunction ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
Non-aqueous phase liquids (NAPLs ) are organic liquids such as fuel oil and gasoline that are sparingly soluble in water and are not subject to efficient removal by other technologies. Because they do not mix with water, they form a separate phase. NAPLs can be lighter than water (LNAPL) or denser than water (DNAPL). NAPL contamination commonly exists as a separate organic phase that becomes ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
This foam gasket material is used to seal between air stripper trays and the lid. Use this gasket material in conjunction with PRM air stripper gasket grease for an air tight seal. PRM recommends replacing air stripper gaskets at least annually under normal conditions, or more frequently in harsh site ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
The PRM EFM-DN series meters are flow totalizing meters that can be used to provide rate flow and totalized flow of various liquids such as water, polymers, surfactants and other chemicals. These meters are non-invasive electromagnetic meters designed for harsh applications and long life with excellent accuracy. Unlike paddlewheel, vortex or other mechanical meters, there are no moving parts ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
Modern oil water separators require coalescing media to attain high performance requirements. The oil removal concept is through the collision of the oil droplet with the media surface or "adsorption" where gravity separation becomes a lesser element of oil removal in coalescing ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
Remediation of contaminated water streams. Designed to operate at low pressures without sacrificing ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
The Air Sparging process injects pressurized air into the soil or ground water to facilitate the removal of harmful vapors from VOC contaminated soil or ground water. The process also promotes biodegradation and is often combined with soil vapor extraction (SVE) to improve ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM carries the best blowers in the business using major manufacturers. Bare blower units are available or contact PRM about different blower packages. PRM supplies blowers from all major manufacturers: Eurus Blowers, Roots, Gardner-Denver, Tuthill, Rotron, Gast, Airtech and ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
SCADA is the primary method for gathering real-time data. SCADA is an acronym that stands for “Supervisory Control and Data Acquisition.” The PRM SCADA systems allows for remote monitoring and control of landfill equipment from a central remote site. Typical equipment monitored are air compressors, flares, blowers, pumps, levels, lift stations, and overall gas system ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
Liquid filter bags made of polyester felt to offer you quality and efficiency in each bag. Polyester Felt bag materials offer high dirt holding capacity at a low cost. Polypropylene Ring with Handles are standard on our bags at no additional cost. ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM manufactures Ozone Treatment Systems for In-Situ and Ex-Situ treatment of groundwater. Product Recovery Management has partnered with Spartan Environmental Technologies to build complete ozone ground water treatment systems and Advanced Oxidation Process (AOP) systems. PRM and Spartan combine ozone and other treatment technologies to provide turnkey solutions to groundwater contamination. ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM can provide a Chemical Feed Pump and Sequestering Agent to your system to help prevent fouling and clogging of your water treatment ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM manufactures high quality Moisture Separators specifically for SVE and Dual Phase applications. Moisture Separators are used in conjunction with many remediation and landfill process equipment to remove unwanted moisture. They are often called knockout ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM Oil Water Separators provide high efficient fluid separation with low maintenance that can operate as standalone systems or used with integrated packages. These industrial-duty units are designed for flow rates from 1 to 100 GPM. Higher flow rates can be manufactured upon request. Our separators are manufactured using heavy gauge 304 stainless steel and can be supplied with internal sumps or ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM has been manufacturing oxidizers for the remedaiation market for over 15 years. Our designs put safety first! Gas Fired Thermal Oxidizers are typically used for destruction of higher concentrations of VOCs. When operated in a straight thermal mode, the units are fired to 1400° F and retention times are 1.5 seconds. Destruction is typically >99.99% for VOCs. When operated in catalytic ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
.5" X 20" SPUN POLYPROPYLENE SEDIMENT FILTER ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
Air Strippers are designed for removal of volatile organic compounds and other contaminants for groundwater remediation or municipal applications. Air strippers use the simple approach of transferring the contaminants from the water stream to the air stream. PRM low profile air strippers use forced counter current air distributed across horizontal trays to remove volatile organic compounds from ...
Manufactured by:PRM Filtration based inButner, NORTH CAROLINA (USA)
BFHBFH2SLDORX: Top O-Ring (Viton) for #2 Flat Plate Bolt Top High Pressure Housing (For use with Carbon Steel Housing BFHBFH2CSX and Stainless Steel Housings BFHBFH2 and BFHBFH2NPTX). BFHBFSMALLVITONORING: Small Diameter O-Ring (Viton) for #2 Housing (fits under strainer ...