- Home
- Equipment
Refine by
Secutron Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
These 135 degree fixed and rate-of-rise heat detectors operate by using a matched pair of thermistors to sense ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
The BEAM1224– CONVENTIONAL BEAM SMOKE DETECTORS is a four-wire conventional reflected beam smoke detector, which is uniquely suited for protecting open areas with high ceilings, where other methods of smoke detection are difficult to install and maintain. This type of conventional smoke detectors is to be used with UL Listed compatible control panels only. An advantage of this single-ended ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
The SD-2 / SD-4 Series photoelectric smoke detectors are engineered to meet strict UL fire safety codes and effectively respond to a wide spectrum of ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
Secutron's MMX Series Network Fire Alarm Control Units offer modular components to meet a wide variety of applications. Designed for peer-to-peer network communications, the MMX Series allows for a maximum of 63 nodes, while providing reliability, flexibility and expandability. The MMX Series is a powerful system capabale of providing network control, multi-channel voice evacuation and two-way ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
The MR-2312-LDR is equipped with twelve Class “B” (Style “B”) initiating circuits and four Class “B” (Style “Y”) indicating circuits rated @ 1.7 Amps maximum. (Total of 5 Amps). Two MR-2300-A Six Initiating Circuit Class “A” Converter Modules may be used for Class “A” (Style “D”) wiring of the initiating circuits. ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
Secutron’s MR-3500 Series systems are powerful intelligent fire / agent release control panels that are UL/ULC listed and FM ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
The NEW MIX-4001 and MIX-4002 mounting bases are used to interface series 4000 detectors to the SLC line and remote ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
The heat detector operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions the two thermistors register similar temperatures; but, on the development of a fire, the temperature recorded by the exposed thermistor will increase rapidly, resulting in an imbalance that causes the detector to change ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
The chamber is designed to exclude light from any external source. At an angle to the LED is a photo-diode which normally does not register the column of light emitted by the LED. In the event of smoke from a fire entering the chamber, the light pulse from the LED will be refracted into and registered by the photo-diode. If the photo-diode “sees” smoke on the two following pulses ...
Manufactured by:Secutron based inVaughan, ONTARIO (CANADA)
Secutron’s MR-2200 Intelligent input fire alarm control panels provide flexible and cost effective operation to satisfy system requirements for both economy and ...