- Home
- Equipment
Refine by
Solexperts Environmental Equipment & Supplies
41 equipment items found
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The MRD is a multifunctional, battery-operated hand-held readout device to measure and record a variety of different analogue and digital sensors. The sensors are connected via terminals or sockets. The type of sensor is chosen via menu control, the connection assignment is displayed and the measurement is triggered. Sensor signals can be converted in physical units such as mm or mWS by entering ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Solexperts has many years of experience in developing customised systems for individual project requirements. We design and manufacture the systems in our in-house electronics and mechanical workshops in close cooperation with the customers. Examples, from left to right; pump control, data acquisition for TDR sensors, DAS and control board for test stand for fracture hydraulic ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
There are almost no limits to the size and length of inflatable sealing rubber sleeves. Even large calibre boreholes or microtunnels can be isolated with the help of packer systems. For in-situ tests on a large scale, Solexperts Mega-Packer systems are now used up to 1000 mm in ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Geochemistry plays an important role in the storage of radioactive waste in deep geological repositories. The chemical composition of the host rock and groundwater is the subject of many investigations. The transport properties of the host rock and the influences of the construction and operation of a repository on the geochemistry are clarified in rock laboratory experiments. Especially on ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The sensors are connected to interfaces that are connected to the Watchdog via a data bus cable, making installation and maintenance simple and cost-effective due to the modular design. The data bus can also be replaced by wireless data transmission. The system is equipped with overvoltage protection. The system can be access from any external PC with a connection via modem or broadband internet ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
With the Reverse Head Extensometer, deformations can be continuously observed during excavation in front of the tunnel face or during the removal of slopes or the excavation of excavation pits. The modular design based on a chain of single extensometers provides a large number of measuring points in small diameter boreholes. The big advantage compared to other extrusion measuring systems is the ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Displacement measurements along measuring lines (boreholes) provide information about the deformation behaviour of hard rock or unconsolidated rock in the area of the monitored terrain or structure, as well as about the interaction between the structure and the ground. With the Sliding Deformeter, displacement and deformation profiles in soil, rock and structures are precisely recorded metre by ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The inclinometer measuring line is formed by the measuring tubes installed in ground, rock or structure. Standard connecting tubes made of HPVC with internal grooves are available for guiding a borehole inclinometer measuring probe. The connection between the individual measuring tubes can optionally be designed with a telescopic ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The sliding micrometer measuring line is formed by the measuring tubes installed in the ground, rock or ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Measuring tube made of HPVC, telescopic coupling made of brass with high-precision conical measuring stop. Option: Water pressure-tight measuring tubes (double O-ring seal). Used for high-precision measurement axial displacement measurements in soil, rock and in boreholes in concrete ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Measuring tube made of stainless steel, telescopic coupling made of brass with high-precision conical measuring stop. Option: Water pressure-tight measuring tubes (double O-ring seal) and foil wrapping to prevent longitudinal stiffening. Used for high-precision measurements of axial displacements in swelling rock ("gipskeuper", anhydrite). ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Measuring tube made of HPVC, telescopic coupling made of brass with high-precision conical measuring stop. Option: water pressure-tight measuring tubes (double O-ring seal). Used for high-precision measurements of axial and radial displacements along vertical measurement lines in soil, rock and in boreholes in concrete structures. ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Our Double Packer Standard Systems (DPSS) are used in boreholes up to 300 m depth. The test equipment includes the borehole instrumentation (packer with test rod, probe, valve), the control unit for flow and pressure and the data ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The double packer system was developed, built and successfully used in stimulation tests by Solexperts for Geo-Energie Suisse as part of their involvement in the Bedretto rock laboratory. The test tool essentially consists of a double packer system for stimulation and a series of geophones which are used to measure and localise the seismic events of the hydraulic ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Solexperts developed the Heavy-Duty Double-Packer System (HDDP) for the geohydraulic characterisation of hard rock up to 2000 m depth. The robust test equipment is characterised by high measurement accuracy and great ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Surface extensometers are used to measure displacements on surfaces over distances of 1 to several metres. The sensors, which are encapsulated in a water pressure-tight stainless steel housing, are usually linear potentiometers with a measuring range of 50, 100 or 250 mm and a measuring accuracy of +/-0.02 ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The curvometer is used to measure changes in the curvature of component surfaces. The deformometer measures distance changes on component surfaces on a base length of 0.5 or 1 m. The measurements can be used to calculate the acting normal force and moment stress on components when they change elastically. The measurements can be used to calculate the acting normal force and moment stress on ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The Multi-Packer System is a versatile and cost-effective multiple packer system that can already be installed in very small borehole diameters (from 50 ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
The Pump Multi-Packer System (PMPS) is a conventional multi-packer system with a double-valve pump and pressure sensor installed in the test ...
Manufactured by:Solexperts AG based inMönchaltorf, SWITZERLAND
Measuring tube made of steel, telescopic coupling made of brass with high precision conical measuring stop. Option: water pressure-tight measuring tubes (double O-ring sealing). Used for high precision measurements of axial and radial displacements along vertical measurement lines in piles and diaphragm walls. Measuring tubes are inserted into the reinforcement. ...