- Home
- Equipment
Refine by
Spetec Environmental Equipment & Supplies
12 equipment items found
Manufactured by:Spetec Europe based inWommelgem (Antwerp), BELGIUM
Ultra low viscosity acrylic injection resin mainly applied for soil conditioning and screen injections. AP SOILGEL 200 is a resin, based on Acrylic monomers. After injection, the resin gels in a few seconds to a few minutes based on the amount of activator/initiator added just before use. The final injected product is a soft and slightly sticky crosslinked gel which becomes more jelly the more ...
Manufactured by:Spetec Europe based inWommelgem (Antwerp), BELGIUM
Ecological washing agent for polyurethane injection equipment . SPETEC PUMP CLEANER is a non-flammable solvent mixture for cleaning polyurethane grout pumps and equipment. SPETEC PUMP CLEANER is composed of a mixture of organic solvents with high dissolving properties for liquid polyurethane ...
Manufactured by:Spetec GmbH based inErding, GERMANY
The optionally available Spetec stepper motor controller SMC01 is a versatile control board for 2-phase stepper motors with a step angle of 1.8°. It can be operated in two different modes. The signal control mode is intended for use in simple systems, while interface mode is intended for operation at a PC or in a more complex system with its own bus ...
Manufactured by:Spetec GmbH based inErding, GERMANY
Clean room cells with hard wall panels are mainly used in areas that demand an extremely high level of process reliability. Overpressure prevents particels from entering the clean room. The flexible wall system makes it possbile to extend the clean room cell at any ...
Manufactured by:Spetec GmbH based inErding, GERMANY
The optionally available Spetec stepper motor controller SM04 is an in-house development that can be fixed directly to the pump. It has been designed for the operation of 2-phase stepper motors with step angles of 1.8° and 0.9°. Using the Spetec SM04, a single full step can be subdivided into 64 microsteps. This corresponds to 12,800 steps per revolution. This ensures that the equipment ...
Manufactured by:Spetec Europe based inWommelgem (Antwerp), BELGIUM
2 component polyurethane injection resin for stabilisation applications and void filling.Medium viscous, 2 components, solvent and phthalate free, expansive, polyurethane resin developed for stabilizing railway ballast, for improving and stabilsation of various loose types of soil and filling ...
Manufactured by:Spetec Europe based inWommelgem (Antwerp), BELGIUM
HYDROPHILIC BENTONITE STRIP FOR WATERPROOFING OF CONSTRUCTION JOINTS IN CONCRETE. SPETEC BST300 is a black hydrophilic strip 25 x 20 mm made of sodium bentonite and rubber with special fillers and crystalline admixture. SPETEC BST300 is manufactured in lengths of 5 meter. The SPETEC BST300 is simply fastened onto an existing joint. In contact with water and in confined conditions, SPETEC BST300 ...
Manufactured by:Spetec Europe based inWommelgem (Antwerp), BELGIUM
Semi rigid injection resin for sealing leaking cracks and joints. One component, closed cell, hydrophobic, water reactive, phthalate free, low viscosity polyurethane injection resin for stabilisation and water cut-off of large water leaks. In contact with water the SPETEC® STOP H100 will expand and set as a permanent water seal inside the crack or ...
Manufactured by:Spetec Europe based inWommelgem (Antwerp), BELGIUM
Fast reacting rigid injection resin with high expansion (highfoamer) for sealing. Large flow high pressure water leaks and for filling gaps and voids. One component, closed cell, hydrophobic, water reactive, phthalate free, low viscosity polyurethane injection resin for cut-off of large water leaks and void filling. In contact with water the SPETEC® STOP HF300 (Highfoamer) will react fast and ...
Manufactured by:Spetec GmbH based inErding, GERMANY
The Spetec clean room workbench or mini environment is primarily used in the optics, electronics, and mechanical industries, e.g. for display manufacturing or finishing of touch panels and for cleaning optical components. The key difference in comparison to the laminar flow box (FBS series, tabletop unit) is the integrated work surface which can be fabricated from perforated stainless steel, ...
Manufactured by:Spetec GmbH based inErding, GERMANY
The Basic module is a simpler, more affordable alternative to the laminar flow module of the SuSi® series. The laminar flow module is offered in a simple, robust version. With an EC-motor with step-less speed regulation the air flow speed can be adjusted to the requirements. Through the Master/ Slave function one control unit is able to control up 100 Slave-modules (optional). The laminar ...
Manufactured by:Spetec GmbH based inErding, GERMANY
The strip curtain in the "soft wall" version makes it possbile to implement a simple, flexible clean room. Recesses and walls which follow the contours of machines can be achieved without ...