- Home
- Equipment
Refine by
Tekmark Environmental Equipment & Supplies
10 equipment items found
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
We make these elevators with wings which are even with the top of coupling containment box so a pipe wrench can easily be placed on coupling to tighten or ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Spear is generaly used to set liner in the borehold and to recover dropped ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Casing Lifter allows the driller to install casing without welding lugs onto the casing and then having to cut them off. It saves both rig time and labor and is safer than conventional casing lifting methods because there is nothing protruding beyond the casing diameter while the casing is being elevated and lowered. The casing lifter has a capacity of 70,000 lbs static load and an ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Casing Alignment Clamps are used to align flush joint steel casing before welding. Larger sizes are available upon ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Casing Holder is an external gripping device which holds strings of casing on the OD using a conventional "slip" action. It is generally used to hold the casing string in the bore hole while additional lengths of casing are added to the ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Torch Guide is used to direct a PVC saw when cutting PVC casing at the surface. It allows the driller to cut the PVC 90 degrees from vertical with a straight clean cut. It also is used with an acetylene torch to cut steel casing off above ground level with a straight clean cut. The casing protruding above the ground is often the only part of the constructed well viewed by the ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Flush Joint Elevator provides a positive grip onto the casing wall. The 4 carbide teeth bite into the casing. Works on PVC, steel and stainless steel flush joint casing and screen. Four gripper bolts included. Carbide Gripper Points mounted on 1/2" Hex Bolts: S29 each. There are 4 of these bolts on the Flush Joint ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The TekMark Heavy Column Pipe Holder is used to lift and install column pipe. There are 4 of these 3/4" carbide pads gripping the pipe, 2 on each ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
The down the hole casing puller is specifically designed to install PVC liner and to retrieve dropped PVC casing/This tool works off a drill string or drop pipe and a 1/8" cable. When you pull on the drill string or drop pipe the lower section wedges the top section and exerts outward pressure on the PVC, steel or iron pipe. If you wish to extract the tool you pull up on the cable (which is ...
Manufactured by:TekMark Industries Inc. based inSpokane Valley, WASHINGTON (USA)
Operation: Attach drop pipe to female pipe coupling welded to the top lifter bail and attach 1/8" cable to cable loop. You will need enough drop pipe and cable to reach the depth in the casing string where you wish to activate the lifter. The guide point will be on the tool when you get it. You will lower tool down the bore hold until the lifter cap assembly comes into contact with the casing. ...