- Home
- Equipment
Refine by
Therm Environmental Equipment & Supplies
79 equipment items found
Manufactured by:C-Therm Technologies Ltd. based inFredericton, NEW BRUNSWICK (CANADA)
"When all you have is a hammer, everything looks like a nail." The adage rings true in thermal conductivity characterization. It’s better to have options. Trident unleashes the power of three different transient methods with the ultimate toolbox for thermal conductivity measurement. MTPS, TPS and TLS all in one modular package. Choose the right tool for your samples. Choice is ...
Manufactured by:Owens Corning based inToledo, OHIO (USA)
Natural-Therm™ 3.0 PCF Series Spray Foam Insulation is the B-component of a two-component polyurethane foam insulation system. It has a nominal 3.0 PCF spray in place density. Natural-Therm™ was developed using an EPA approved Zero ODP blowing agent. This product provides superior energy efficiency and air filtration control. This product is an approved roofing ...
Manufactured by:Air-Therm Inc. based inMontreal, QUEBEC (CANADA)
The Gravitec Ventilators LTX by Air-Therm are designed for commercial buildings where construction feasibility, cost efficiency, and effective heat release are critical. These low profile ventilators are installed in continuous runs and are optimal for larger beam spans to reduce project costs. They are engineered to prevent rain and snow infiltration under normal operating conditions and ...
Manufactured by:Perma-Pipe Inc. - a division of MFRI INC. based inNiles, ILLINOIS (USA)
FLOW-THERMTM is a highly efficient and cost-effective subsea insulation with excellent compressive resistance. It has high strength, great adhesion, and exhibits toughness when applied on subsea flowlines and risers, field joints, and equipment, such as jumpers, pipeline end terminations (PLETs), pipeline end manifolds (PLEMs), inline structures, shrouds, doghouses, and any moldable structures ...
Manufactured by:Therm-x of California Inc. based inHayward, CALIFORNIA (USA)
Therm-x portable control units (PCUs) have been engineered and designed to allow the R&D Process Engineer to have the maximum flexibility when it comes to thermal control and data acquisition in regards to their temperature process parameters and ...
Manufactured by:C-Therm Technologies Ltd. based inFredericton, NEW BRUNSWICK (CANADA)
Simple and Precise. The MTPS method employs a single-sided sensor to directly measure thermal conductivity and effusivity of materials. The MTPS method has the highest precision, highest sensitivity, shortest test time, and is the easiest to use among all three ...
Manufactured by:KAN sp. z o.o. based inBialystok, POLAND
System KAN-therm ultraLINE is an innovative and the only technical solution on the installation market, designed to make both standard internal heating and drinking water systems, as well as specialised piping installations such as compressed ...
Manufactured by:KAN sp. z o.o. based inBialystok, POLAND
System KAN-therm PP Green is a complete installation system consisting of pipes and fittings made of thermoplastic polypropylene PP-R (type 3) with a diameter range of 20-110mm and beta polypropylene copolymer PP-RCT with a diameter range of ...
Manufactured by:KAN sp. z o.o. based inBialystok, POLAND
Complete, state-of-the-art installation system consisting of pipes and fittings made of high-grade stainless steel. KAN-therm Inox uses the "press" connection technology for quick and reliable installation, eliminating the welding or threading process. ...
Manufactured by:Metos Instruments India Pvt. Ltd. based in, INDIA
The Agri-Therm III™ is the third generation of infrared thermometers for the natural environment manufactured and marketed by Everest Interscience. This handheld infrared thermometer was designed for making surface temperature measurements outdoors and has triple the accuracy of previous infrared thermometers in the optimum working temperature range of the ...
Manufactured by:C-Therm Technologies Ltd. based inFredericton, NEW BRUNSWICK (CANADA)
An economical “do-it-yourself” solution, the TCkit is targeted primarily towards academic researchers. Employing the Transient Plane Source (TPS) method, the TCkit includes the tools & software needed to build and customize a thermal conductivity analyzer at a fraction of the price. Paired with a standard Source Measure Unit (sold seperately), the TCkit is a great way to start ...
Manufactured by:State Industries, Inc. based inAshland City, TENNESSEE (USA)
Eliminates the risk of damage to the boiler and piping in the system. In-line tanks from 2 through 14.6-gallons free-standing models from 14.6 gallons through 96 gallons, plus special Combination Units. Not for use with potable water heating ...
Manufactured by:Therm Dynamics based inTea, SOUTH DAKOTA (USA)
Stand-Alone Flameless Airline Heat Cart; The TD 500 GSE “Flameless” Airline Heat Cart represents over 18 years of field experience, operating 24/7 in extreme conditions in the Gas & Oil Industry. The same safe flameless heat technology demanded by insurers and site safety managers in these “extreme explosive environments” is now available for the airline ...
Manufactured by:Owens Corning based inToledo, OHIO (USA)
Natural-Therm® 0.50 PCF is a 100% water blown, two-component, semi-rigid spray polyurethane foam insulation with a nominal 0.50 PCF in place density. Natural-Therm® 0.5 PCF has been tested and complies with the International Code Council’s AC377 standard and certified by GreenGuard for its non-emissive low VOC technology. This product provides superior energy efficiency and air ...
Manufactured by:Owens Corning based inToledo, OHIO (USA)
Natural-Therm 0.50 IB PCF is a 100% water blown, two-component, semi-rigid spray polyurethane foam insulation with a nominal 0.50 PCF in place density. Natural-Therm® 0.5 IB PCF meets the NFPA 286 Appendix X room corner test for use in attics and crawl spaces without ignition barrier coating. This product provides superior energy efficiency and air infiltration control as a high-performance ...
Manufactured by:Sensience based inWesterville, OHIO (USA)
The 60T Auto Reset Bi-metal Control by Therm-O-Disc is designed specifically for appliance and HVAC applications, offering reliability in a compact and cost-effective design. Featuring snap-action technology, the bi-metal disc quickly separates contacts, providing excellent life cycle characteristics under electrical loads up to 25 amps at 240 VAC. With global agency recognition, this control ...
Manufactured by:Therm-A-Cor Consulting, Inc. based inPhoenixville, PENNSYLVANIA (USA)
Therm-A-Cor Consulting has extensive experience in the operation of all combustion and air pollution control systems, allowing us to provide detailed forensic engineering analyses for litigation purposes. Combustion and air pollution control emissions are closely regulated by the Environmental Protection Agency (EPA). Based on years of experience evaluating the burning of hazardous and ...
Manufactured by:Dirt Killer / Kranzle USA based inLinthicum Heights, MARYLAND (USA)
3ph, 440V Kranzle Therm High Flow 2400 PSI, ...
Manufactured by:Soil-Therm Equipment Inc. based inAgoura Hills, CALIFORNIA (USA)
SOIL-THERM has been building tank degassing oxidizer systems since 1990. And now, we’re introducing our most powerful degassers ever! Our latest 2020-TD direct-fire oxidizer systems can process up to 16,500 pounds of VOC’s per day. Their lower fuel usage, faster destruction time, and touchscreen operating features will make your degassing jobs easier and more profitable than ever ...
Manufactured by:Alfa-Therm Limited based inGurgaon, INDIA
Alfa Therm twin shaft shredders are designed to operate at lower speeds, utilizing high torque and the tearing, crushing and shearing actions between counter rotating, opposing blades. This results in minimal power consumption and reduced noise when compared with other types of shredders, whilst still achieving high throughout rates and maintenance cost. Alfa ThermLtd. Shredders are particularly ...