- Home
- Equipment
Refine by
Utg Environmental Equipment & Supplies
8 equipment items found
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
DIN-compatible model for medium power and torque requirements (1.1-110 kw, 40-125mm) applied with standard seals and gear ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
A mechanical seal is the most secure way to isolate vessel’s gas space from the atmosphere. Mechanical seals always require a buffer liquid system except single acting. UTG applies single, double or triple acting mechanical seals depending on the required sealing security of the ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
A liquid seal or so called water trap is the simplest solution. Since there is no mechanical contact, liquid seals have no wearing parts and do not require regular maintenance. Liquid seals may be applied for moderate pressure differences. Up to 700 mm, an H2O pressure liquid seal is the most reliable and secured sealing ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
An oil slinger is suitable for open tank covers to prevent the contamination of process fluid by gear oil or grease. ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
Developed for agitators requiring a mechanical seal. The innovative design enables the mechanical seal to be removed from the side in less than 1 hour, so the motor and gearbox do not have to be moved. Applicable for up to 750 kW and 60-300 mm ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
Designed to meet all applicable DIN standards. The modular structure can be configured for a wide range of applications from up to 300 kW and for 60-280 mm shafts. The design enables quick seal changes by swiveling the upper part of the mounting. The motor and gearbox do not have to be ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
The bottom bearing is a slide bearing with a shaft sleeve running on a bushing installed into a housing that is mounted to the tank bottom. A wearing sleeve is at the end of the agitator shaft. As the shaft end runs inside the steady bearing, shaft deflections are practically eliminated. This continuous support has a significant impact on the agitator’s critical speed and radial loads to ...
Manufactured by:SPX Flow Technology Norderstedt GmbH based inPorta Westfalica, GERMANY
A stuffing box is a simple and extremely robust shaft seal for isolating the reactor gas space from the atmosphere without pressure differences. Stuffing boxes do not require a buffer fluid ...