Brooks Brothers Trailers
- Home
- Companies
- Brooks Brothers Trailers
- Products
- Brooks Brothers - Model PTB-30-46 - ...
Brooks Brothers - Model PTB-30-46 -Extendable Pole Trailer
PTB-30-46 – 20KA Extendable Pole Trailer. Retracted Length: 30’. Extended Length: 46′. Overall Width: 95”. Bolster Height: 56”.
Most popular related searches
- 22,500 lbs. Single Dexter Axle
- Oil Bath Hubs, 8 Studs on 275mm bolt circle
- Air Brakes on both wheels
- ABS Equipped
- Auto Slack Adjusters
- Hutch 9700 suspension
- Reinforced Spring Hangers with 3” Structural C-Channel Crossmembers
- (4) 11R22.5 Tires
- (4) 22.5″ 8 Bolt Dual Wheels
- Pair – Mud Flaps
- (2) two – Pair Wheel Chock Holders with rubber anti skid wheel chocks Under Deck Both Sides Near Axles. Holders to have retaining mechanism for road travel.
- Front Bolster: 95″ Double C-Channel Construction with (2) 21″ tall Lever Lock Stanchions
- Center Bolster: 95”W Fixed 5” Double C-Channel Construction (2) 21″ Lever Lock stanchions
- Rear Bolster: 95”W Fixed 5” Double C-Channel Construction with (2) 21″ tall Lever Lock stanchions
- Stanchions: (6) Six – 21″ tall Lever Lock stanchions
- (4) Four – Heavy Duty Ratchet Type Winch Binders mounted on street side with Breaker Bar
- (4) Four – 15’ L x 4” W x 12000 lbs. Nylon Straps
- 8” x 4” x 1/4″ Wall Extendable Tongue with Extension Assist Roller and replaceable UHMW-PE Wear Pads
- 2″ King Pin
- 3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
- 7” Structural C-Channel A-Frame
- 12,000 lb Dropleg Jack Mounted at the tongue receiver tube
- *(2) Aluminum Under Body Toolboxes: 18″ x 18″ x 48″L
- 7” x 4” Tubular Steel Frame
- 10” x 6” Receiver Tube
- 7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
- 3” Structural C-Channel Crossmembers
- Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
- Reinforced with 3” Structural C-Channel at Front and Rear of Fender
- 12 gauge Steel Floor Between Center and Rear Bolster
- ICC & DOT Approved LED Lights
- Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
- S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
- Wiring Loom Terminated in Junction Boxes
- Connections Soldered and Sealed with Heat Shrink Tubing
- Internal Wiring in Tongue, Plug Receptacle Located at Each Pinnable Location, Eliminates Coil Cord
- 32” Pigtail w/Electrical Plug, Terminated at Junction Box
- 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
- Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger