- Home
- Companies
- Mil-Tek Denmark A/S
- Products
- Mil-Tek - Model A205 - Cardboard & ...
Mil-Tek - Model A205 -Cardboard & Plastic Baler
The A205 baler is the third generation of Mil-tek pneumatic balers, featuring cutting-edge pneumatic technology that uses compressed air through the cylinder to press and release the pressing plate.Running exclusively on compressed air avoids the risk of contamination from hydraulic oil and means that the A205 runs at a quiet operational level.Covering a floor space are of just 0.45m² but with a longer pressing cylinder and deeper chamber than the A102, the A205 can create bales up to bales of up to 50kg cardboard and 120kg plastic.The A205 is adaptable to the size of the workspace, slotting seamlessly into smaller workspaces or plugging into the airline in large facilities.
-
Bale 50 kg cardboard & 120 kg plastic
-
Double-acting cylinder with ECODrive
-
Optimal working height
-
Super-fast pressing cycle
-
Adjustable bale size
-
0.45m2 footprint
A Mil-tek technician will guide you through installation, which is done by simply connecting your new A102 Baler to a compressed air supply. You are now ready to start minimizing your waste.
Fill the chamber with cardboard or plastic and close the door. Once the handle is pressed down, the machine is activated and the minimizing has begun. Repeat until the baler is full.
When the baler is full, it ready to be emptied. Tie the bale using the banding, open the door and remove from the chamber. You are now ready to start a new bale!
Bales can be stacked and stored until you have enough to have them collected by your local recycler. They take up no more floor space than a sheet of newspaper.
Machine size
- Height (mm): 2462
- Width (mm): 832
- Depth (mm): 541
- Weight: 275 kg
Bale size
- Height (mm): 880-1000
- Width (mm): 655
- Depth (mm): 450
- Bale weight: Plastic: < 120 kg, Cardboard: < 50 kg
Door Opening
- Height (mm): 505
- Width (mm): 650
- Depth (mm): 415
- Degree of Compression: 85-90%
- Noise level: < 70 dB (A)
- Pressure: 2500 kg at 8 bar
- Approvals: CE, EN16500