- Home
- Companies
- Cascade Water Recycle Systems
- Products
- Cascade - Model WFS 42 - Water Filter ...
Cascade - Model WFS 42 -Water Filter System
WFS Series Water Filter System are available in sizes to treat up to 72,000 gallons of wash water per day, or more if needed. Even if you have a high volume car wash, a WFS Series is available to treat your wash water. The Filter System maintains the correct amount of water in the system, adding clean make up water from your supply or discharging excess treated water as required. Your water usage and expense will decrease dramatically. And sewer charges, which are often substantial, may be reduced significantly or even eliminated. Fresh water which is normally used for rinsing is added to the washing system. Any excess water can be automatically disposed of as treated water.
Rated flow: 12 gpm (18000 gpd)
Electrical requirement: 115 VAC, 60 Hz, 1 phase, 15 amp total
Feed pump: Self priming centrifugal cast iron pump with 1/3 HP thermally protected motor. Collects water from washing area.
Discharge pump: High head centrifugal pump with 1/2 HP thermally protected motor. Supplies pressurized water to use.
Electrical controls: GFCI provided Prewired with 15 amp plug, 10 ft cord Power switch, lighted NEMA 4 rated enclosure
Oxidizer metering pump: Electronic controlled diaphragm pump with stroke rate and stroke length controls and automatic degassing head. Injects oxidizer to control odor and bacteria.
Filter system: High capacity permanent element filter system with manual backwash, plus replaceable 20" long 5 micron cartridge filter for final polishing.
Holding and collection tank: 1000 gallon polyethylene holding tank, With divider and inlet and outlet piping.
Make up water: Flow as required for application 100 psi maximum pressure
Connection sizes: Feed pump- 1 NPT
Treated water outlet- 1 NPT
Drainline- 1NPT
Make up water- 1/2 NPT
Overall dimensions: Tank 9 ft long, 5 ft wide, 5 ft tall Control and pumping module 4 ft long, 2 1/2 ft wide Module includes pumps, control panel, and filter system.
Shipping weight: 600 pounds approximate
Options: Additional water storage capacity. pH adjustment system. Activated carbon water polishing system. Ozone treatment. Pretreatment systems, oil skimmers, oily water separators. Custom modifications available.
The WFS Series Water Filter Systems are designed to handle high volumes of industrial waste water. These completely automatic treatment units will collect your dirty wash water and process it so that it can be reused in the washing operation. The WFS draws the wash water from your collection sump and transfers it to the holding and collection tank. The solids separator removes much of the heavy sand and grit and deposits it in the collection container for disposal. Additional solids that settle in the holding tank are also deposited in the collection container.
The Filter System not only cleans the water, but also adds an oxidizer reagent to kill bacteria and odours. The oxidizer is used to make the water more environmentally friendly and less hazardous for personnel doing the washing. Rinsing normally uses fresh water which is collected with the wash water. Any excess water can be automatically disposed of as treated water, more easily achieving compliance with environmental regulations2