Centrimax - Pressurization Units with Horizontal Pumps

CENTRIMAX pressurization units are systems made with normalized horizontal axis centrifugal electric pumps in monobloc design with IE2 three-phase electric motor. The range includes units from TWO to THREE pumps. The units are suitable for use within civil, industrial and agricultural installations when high flow rates and heads are required, operating continuously. Drive is by inverter or electronic control unit.

P Version
With pressure switch and control from switchboard

EP Version
With control from pressure transducer and control from inverter

IP Version
With control from pressure transducer and switchboard control with inverter complete with emergency pressostatic ciscuit

LIMITS OF USE:

• Clean liquids, not containing abrasive particles, not chemically aggressive
• Max. temperature of the liquid 90° C
• Maximum temperature of the environment 40° C

In case the units are to be used with osmotized or deionized water, please send detailed technical specifications to our technical department.

COMMON COMPONENTS:

• Bent sheet metal base supported by height-adjustable feet for optimal insulation against system noise propagation.
• 2 or 3 three-phase electric pumps with induction motors at 2900 rpm IP 55 IE2
• Stainless steel suction manifold
• Stainless steel discharge manifold with sleeves of preparation for mounting membrane storage tanks.
• Shut-off ball valves, on suction and discharge
• Check valve on the discharge.
• Clicerina bath pressure gauge on the discharge manifold.