- Home
- Companies
- Cutting Edge Solutions
- Products
- CES - Model Micro 6-0-0™ - 3-Part Base ...
CES - Model Micro 6-0-0™ -3-Part Base Family System
Micro 6-0-0™ is one of three components that create the complete Cutting Edge Solutions® 3-Part Base family. Micro 6-0-0™ is the foundation for the 3-Part formula and is used at the same rate through the entire life cycle of your plants. Micro 6-0-0™ contains all of the micronutrients needed for peak health, along with the nitrogen and calcium foundation for the 3-Part Base formula. Commercial and small sizes available: 1 Quart, 1 gallon, 2.5 gallon, 6 gallon, 15 gallon, 55 gallon barrel, and 270 gallon tote. *Please expect a 2-week lead time on placing commercial-sized orders.
- Total Nitrogen (N) 6.0%
- 0.3% Ammoniacal Nitrogen
- 5.7% Nitrate Nitrogen
- Calcium (Ca) 5.0%
- Boron (B) 0.02%
- Iron (Fe) 0.1%
- Manganese (Mn) 0.05%
- Molybdenum (Mo) 0.0008%
Derived from: Sodium Molybdate, Calcium Nitrate, Zinc Nitrate, Boric Acid, Calcium Carbonate, Manganese, EDTA, Iron EDDHA, and Iron DPTA.
Information regarding the contents and levels of metals in this product is available at: http://www.aapfco.org/metals.html
Micro 6-0-0™ is a highly concentrated nutrient solution. Never mix undiluted concentrates as this may result in nutrient lock-up. Add other nutrients separately to water and aerate reservoir regularly. Do not add additional Micro 6-0-0™ to a prepared reservoir.
Shake well and measure carefully using a milliliter measuring cup. Mix Micro 6-0-0™ first into fresh water, stir well, then add other nutrients.
After nutrients are mixed in water, adjust pH to 4.5-6.5.
Monitor ppm and EC in reservoir and top off with fresh water as needed. Empty and refill tanks every 1-2 weeks.
Reservoir water temperature should be 60-68 degrees F.
Do not store product in direct sunlight. Do not freeze.
Micro 6-0-0™ is designed for use in hydroponics, soilless, continuous feed systems, drain to waste, and soil applications.