COBAS - Green Oxygen Sealing Tape
COBAS GREEN OXYGEN SEALING TAPE Is a full or maximum density, thread sealing tape designed specifically for oxygen lines. where as normal PTFE thread sealing tape is manufactured from PTFE resin mixed with a small amount of solvent. For normal applications it does not matter if the solvent is not removed from the finished product. However, when operating in a pure oxygen environment remaining volatiles can react with the oxygen and cause an explosion. So Cobas Green Oxygen Tape is put through a rigorous process to remove the solvent. Furthermore, Cobas Green Oxygen Tape is a thick, full-density thread sealing tape. Thus, the fitter can be assured that he or she will get an effective seal. Also, as an important safety feature, Cobas Green Oxygen Tape is pigmented green to ensure that the fitter or inspector can easily recognize that the tape he or she is using is compatible with oxygen.
Suitable for sealing oxygen systems and other gases Provides an impenetrable barrier to oxygen at pressures up to 200 bar with a Wide temperature range -268c to +260c Will not string or shred only a few wraps required Tested and approved by BOC, and BAM institute of Berlin.
- Colour Green
- Length /10m
- Width /12mm , /19mm and /25mm
- Thickness 0.102m m ± 10%
- Density, apparent 1.5g/cm 3± 10%
- Elongation >100%
- Tensile strength 12.5N /m m 2 average
- Pressure rating Green Oxygen Tape has been used regularly on oxygen fittings at pressures up to 2,173.9PSI .or 15,000kPa
- Note . Pressure ratings are relative to the quality and torquing of the fittings and the amount of tape used.
- SKU: oxygen (12mmx10m) (19mmx10m) (25mmx10m)
- oxygen safe PTFE Tape
- for sealing oxygen systems
- oxygen bottles and pipe lines
- pressures up to 200 bar
- tested and approved by BOC, AND BAM institute of berlin
- Colour Green
- Length /10m
- Width /12mm , /19mm and /25mm
- Thickness 0.102m m ± 10%
- SKU: oxygen (12mmx10m) (19mmx10m) (25mmx10m)