Sal-Chlor - Model SAL500 & SAL800 -Commercial Systems

ORP Controller Interface
(for fully automatic chlorine metering control)
No: 1
Description: Water flow sensor – in Cell Module

Trip and Visual Alarms for Water Flow Fault, Over-Current & High Temperature

Incorporates interface for automatic chlorination control utilising an ORP Controller (refer specifications for correct Input Signal)

Remote Alarm Extension
No: 1
Description: Facility for connection of external, visual or audible alarm in the event of Alarm fault

Cell Blank End Plates
No: 2
Description: For uninterrupted water flow in the event of electrode assembly service

OPTIONAL EQUIPMENT
ORP Controller
No: 1
Description: Supplied

Salinity Meter
No: 1
Description: Hand held test meter supplied

• Models : The SAL Saline Chlorinators and Chlorination Systems consists of various modular units with variable chlorine production capacities
• Type : In-line – Commercial Hypochlorite Plant
• No. of Units
• Plant can be designed to comfortably meet chlorine production requirements with single rectifier/cell modular units. If system back up is required or desirable, systems can be designed to tolerate multiple cell shut-down without affecting the rest of the system
• Chlorine Production : From 50 grams per hour to 50 kilograms per hour or greater
• Salt Concentration : The system relies on the presence of salt in the water, ranging from seawater concentrations (3.5%) to as little as 5,500 ppm salt concentrations
• Water Treatment Volume :
• The pre-engineered range is designed to meet the chlorine requirements of any water volume or water flow rate. Where pre-engineered models are not suited to a particular application, units are tailor designed
• Rectifier : Designed to Australian Standards AS3108 & AS2374
• Cabinet : Thickness – 1.6mm
• Finish : Powder coated zinc anneal steel to 85 microns
• Power Supply :Up to and including 330 grams/hr – Single phase power supply
• > 330 rams/hour – 3 Phase power is required
• Single Phase 3 Phase Rectification
• Primary Input Voltage : 110-240V 415V
• Rectifier Controller : Transformers are tapped for world power variation
• Equipment : Variable Chlorine Control
• Ammeter (conventional)
• Main Power On Switch
• Rectifier Power On Switch
• Lamps displaying: Power On, Rectifier On, Water Flow Fault, Temperature Alarm
• Soft Start Up : For maximum cell protection the unit is fitted with thyristor controls, soft start auto voltage and amperage romping
• Cooling System : Air or Fan cooled (on larger units)
• Electrode Cell(s) : Type – Monopolar, solid 1.6mm solid plate electrodes
• Material ; Cathode – Solid Titanium plateAnode – Solid Titanium plate, coated with SC6 industrial quality coatings
• Cell Cleaning : Up to 330g/h Cl – Removal of cell and manual acid cleaning with mild acid solution, facilitated by acid cleaning chamber
• Above 330g/h Cl – Provide a semi-automatic, manual valve operated acid wash system, incorporating pump, check valves and acid tank
• Plumbing
• Pipes, fittings and valves – Industrial grade heavy walled PVC or CPVC. Factory tested to 400 kPa. Electrode Inspection facilitated by clear PVC inspection portal in cell chamber
• Minimum Water Flow
• The electrode cells require minimum water flow rates to ensure efficient heat transfer and maximum efficiency. Refer to Commercial Plant Specifications

The SAL Saline Chlorination Plant is designed and manufactured by the Sal-Chlor Group for commercial applications. Sal-Chlor Climax Global  makes a quality product which is designed with longevity in mind.