Bosna - Model Istok M - UPON-1M -Controller Custody Transfer Metering Units
“Source” uun-1 has no soft start function and is used with pumps up to 0.6 kW. “”Source M” UPUN-1M has soft start function and is used with pumps up to 1,8 kW.
The controller is designed and manufactured to control centrifugal, vortex and other submersible, vibration and surface pumps up to 1.8 kW, and with contactors up to 5 kW.
The controller can automatically adjust to the actual parameters of the water supply system to which it is connected, and it is possible to set the desired parameters for the consumer, for example – the pressure of the pump on and off the pump, set the desired constant pressure in the network, which will support the controller, and others
The controller can be configured for any desired configuration of the water supply system, for example: a system with a hydraulic accumulator with a choice of its capacity, a system without a hydraulic accumulator, a system including a hydraulic accumulator and other elements to maintain the set pressure in the system.
- Control of any type of pump – submersible, surface, vibration.Fine tuning and protection for clear operation with any hydraulic system to which it is connected.This is ensured by the presence of 45 functions in its program
- The constant line pressure within the pump power
- Soft start to eliminate hammering when turned on.
- Automatic switching on and off of the pump when opening or closing the tap
- Dry running protection and pressure setting.
- Protection against unacceptable voltage drops in the network and setting their limits
- Setting the pump on and off pressure.
- Selection, installation and maintenance of the desired system pressure (when working with the wind pump)
- Автоматическую настройку системы под параметры конкретной сети
- System protection from emergency situations (burst pipes, defective taps)
- Indication of the actual operating time of the pump and the current pressure in the network.
- No effect of sticking the pump shaft for a long period of no use of the station.
- The ability to carry out watering, setting the time on and off the pump
Programmable pressure
Dry running protection and pressure setting
Automatic configuration of the system according to the parameters of a particular network.
When using this controller complete with pump, no more relays, pressure gauges and other parts used in a conventional water supply station are needed, an expansion tank can be used if desired
Performance
- Disclosure of the total power of the pump used
service Life
- 10 years