Converto - Lugger Units

• One truck becomes a fleet with detachable containers
• One driver can operate the ConverTainer system
• Not limited to one container manufacturer
• J-hook system is an exclusive method used in the ConverTainer system
• Dumping flexibility.  Need a dump hook method?  ConverTainer does it
• ConverTainer is compatible with apron center dump hooks
• Container designs for liquid or solid material
• Jack leg trunnion assembly standard
• Fixed jack leg assembly is standard on Model 120-H-50 : available on other models
• Load flexibility. See table below
• Model numbers track lifting capacity
• Experienced people will readily suggest the right combination of chassis and lift hoist model for your particular needs

• Low pressure hydraulic system : less wear on components and easy on maintenance
• Air controls AND cable controls available
• Inside controls standard
• Outside controls : outside are optional
• Hydraulic equipment placed for easy access
• Control valves are mounted on top for easy maintenance
• Oil reservoirs are top-mounted at the right side for cleanliness and convenience in use

• Single axle on lower weight hoists
• Tri Axles & Air Lift available
• Contact/Jackleg cylinders.  Make the PTO do the lifting and dumping
• We have Pup Trailers.  Work smart and save TIME AND FUEL
• Save maintenance time and cost

Converto will supply containers to your order for liquid or solid materials - or you may use other containers of similar appearance and dimension!  You are not limited to one manufacturer`s container design.

Years of know-how help Converto engineer longevity into each product, saving you maintenance time and cost.  For example, load shifts result in slipping of the load arms on the load shaft.  With a ConverTainer unit, the worst thing that can happen is that a fitting held by six bolts may be forced out of position.  Replacement is a five minute operation.  Compare that with the redrilling which may be required by a broken shear pin assembly!

Heavy, rugged construction cuts maintenance costs.  Weight distribution is enhanced by mounting on a shorter cab to center of tandem dimension, increasing strength.

Easy access for service is built in. 

Twin J-hooks enable dumping, allow ConverTainer hoists to pick up other makes of containers.  In dumping the container is held firmly in place as hydraulic contactors fit into the curve of the "J."

Model #54-H-12:

• Loading Capacity - 12000 LBS
• Weight of Hoist - 4600 LBS
• Cylinder Size - 7" x 40"

Model #78-H-12:

• Loading Capacity - 12000 LBS
• Weight of Hoist - 5200 LBS
• Cylinder Size - 7" x 40"

Model #78-H-20:

• Loading Capacity - 20000 LBS
• Weight of Hoist - 5200 LBS
• Cylinder Size - 8" x 40"

Model #96-H-26:

• Loading Capacity - 26000 LBS
• Weight of Hoist - 7000 LBS
• Cylinder Size - 8" x 45"

Model #96-H-30:

• Loading Capacity - 30000 LBS
• Weight of Hoist - 7000 LBS
• Cylinder Size - 9" x 45"

Model #120-H-35

• Loading Capacity - 35000 LBS
• Weight of Hoist - 7950 LBS
• Cylinder Size - 9" x 45" 

Model #120-H-35 LD:

• Loading Capacity - 35000 LBS
• Weight of Hoist - 8200 LBS
• Cylinder Size - 9" x 45"

Model #120-H-50:

• Loading Capacity - 50000 LBS
• Weight of Hoist - 10000 LBS
• Cylinder Size - 9" x 50"

Dump method/containers

• One truck becomes a fleet with detachable containers
• One driver can operate the Convertainer system
• Not limited to one container manufacturer
• J-hook system is an exclusive method used in the Convertainer system
• Dumping flexibility. Need a dump hook method? Convertainer does it
• Convertainer is compatible with apron center dump hooks
• Container designs for liquid or solid material
• Jack leg assembly trunnion assembly standard
• Fixed jack leg assembly is standard on Model 120-H-50 : available on other models
• Load flexibility. See table above
• Model numbers track lifting capacity
• Experienced people will readily suggest the right combination of chassis and lift hoist model for your particular needs

Hydraulics

• Low pressure hydraulic system : less wear on components and easy on maintenance
• Air controls AND cable controls available
• Inside controls standard
• Outside controls : outside are optional
• Hydraulic equipment placed for easy access
• Control valves are mounted on top for easy maintenance
• Oil reservoirs are top-mounted at the right side for cleanliness and convenience in use

Chassis

• Single axle on lower weight hoists
• Tri Axles & Air Lift available
• Contact/Jackleg cylinders. Make the PTO do the lifting and dumping
• We have Pup Trailers. Work smart and save TIME AND FUEL
• Save maintenance time and cost

Converto will supply containers to your order for liquid or solid materials - or you may use other containers of similar appearance and dimension! You are not limited to one manufacturer`s container design.

Years of know-how help Converto engineer longevity into each product, saving you maintenance time and cost. For example, load shifts result in slipping of the load arms on the load shaft. With a Convertainer unit, the worst thing that can happen is that a fitting held by six bolts may be forced out of position. Replacement is a five minute operation. Compare that with the redrilling which may be required by a broken shear pin assembly !

Heavy, rugged construction cuts maintenance costs. Weight distribution is enhanced by mounting on a shorter cab to center of tandem dimension, increasing strength.

Easy access for service is built in. 

Twin J-hooks enable dumping, allow Convertiner hoists to pick up other makes of containers. In dumping the container is held firmly in place as hydraulic contactors fit into the curve of the "J."