- Home
- Companies
- CP Pumpen AG
- Products
- CP-Pumpen - Model MKP-ANSI - Magnetic ...
CP-Pumpen - Model MKP-ANSI -Magnetic Drive Chemical Process Pump
Pump dimensions to ANSI ASME B73.3. Compact design with virtually no dead areas, allowing easy and efficient heating. Horizontal and vertical configurations available. Hydraulically balanced impeller for minimum bearing loads. Internal and external bearing lubrication and flush options. Solids handling capability up to concentrations of 30% and a particle size of 1/25" depending on the pumped fluid. Lower installation costs due to a single heating jacket for heating. Excellent heat distribution reducing temperature differences and preventing cold zones. Fast heat-up time assured by high heat transfer efficiency and heating energy delivered directly into the fluid chamber. Modular system consisting of just a few components, easy assembly.
Construction
- bearing frame & monoblock design
- no shaft feedthrough & leak-free
- low product content
- free of dead space
- no plain bearing carrier, no rotating shaft
- single-part & central bearing, on all sizes
- horizontal & vertical installation possible
- low bearing forces due to hydraulically balanced impeller
- internal & external bearing lubrication options
- high material flexibility (casing, impeller as well as plain bearing materials)
- eddy-current-free shroud possible (=> reduced energy consumption)
- inverted drive principle
Heatability
- single-part heating chamber system
- very efficient heatability
- only 1 entrance and 1 discharge connection
- simple & easy to heat, a single heating jacket reduces installation costs
- low temperature difference in the pump & no cold zones thanks to excellent heat distribution
- short heating up time due to high thermal transfer efficiency & direct feed of the heating energy into the fluid space
Assembly & repair
- modular system made up of few individual parts
- assembly friendly
Standard
- ANSI ASME B73.3
Capacities
- 1 bis 450 gpm
Heads
- 10 to 310 ft
Pressure rating
- PN 16
Temperatures
- -148 to +482°F
Kinematic viscosities
- 0.5 to 350 mm2/s
Solids handling
- Up to 30% solids concentration and 1/25" particle size, depending on the pumped fluid
Casing Materials
- Stainless steel 1.4581 (316Ti)
- Other materials
- Stainless steel (e.g. 1.4306, Uranus® B6), duplex alloys (e.g. 1.4517), nickel-base alloys (e.g. Hastelloy® C-4, C-22), nickel (e.g. 2.4170), titanium (e.g. Grades 2 and 7) and titanium alloys (e.g. Grade 5) ceramic coating
Working Principle
- Radial flow pump
Stages
- Single stage
Priming Method
- flooded suction
Sealing System
- Magnetic coupling
Configurations
- CP`s standard configuration: Close-coupled
- Additional options: Horizontal, baseplate, bracket
Standarts
- ANSI ASME B73.3
Other Regulations
- FDA 21 CFR §177
- Casing Arrow Black
- Bearing Assembly Arrow Black
- Containment Shell Arrow Black
- Pump Protection Arrow Black
- Mounts Arrow Black
- Bearing Frame