CSI - Aboveground Oil Water Separators
These systems are designed to separate free oils and settleable solids from rainwater runoff and washdown applications in a gravity or pumped flow for intermittent, variable, or first flush flow of oil, water, or a combination of non-emulsified oil/water. Systems are installed either at grade or below grade (within a vault) and feature 10 PPM effluent discharge, low maintenance, and the superior quality that we deliver.
Water from washdown sources are contaminated with oil and/or grease from trucks, cars and other dirty equipment. Either through direct flow or pumping when necessary, Containment Solutions Oil/Water Separator Systems remove free oil and grease to achieve an effluent quality of 10ppm to meet your discharge requirements. The concentrations and types of contaminants determines the allowable flow rate through the system.
Remediation SystemsContainment Solutions Oil/Water Separators remove free oil and grease to achieve an effluent quality of 10ppm to meet discharge requirements.
Specialty application separators are also available to meet specific needs such as
- Mop-up units
- Portable units on casters
- Rainwater runoff
- U.S. Coast Guard Test Method 46 CFR 162.050
- The API MAual on Desposal of Refinery Wastes
- Stokes Law
- EPA Test Method 413.1 and 413.2
- API Bulletins NO. 421 and 1630 (first selection)
- UL 142
- Specific gravity or contaminants
- Inlet flow rates
- inlet oil concentration
- Oil storage capacity
- Oil spill capacity
- Temperature
- Effluent quality requirement