CYCO - High Voltage Microfog Humidifier
Technical parameters of the air consumption of a single nozzle: 0.056m3/min for a single nozzle applicable area: 80m2 power frequency: 220V/50Hz air pressure: 0.7-1.0Mpa water supply pressure: 0.1-0.6Mpa water supply quality: drinking water or deionized water system humidification: 49kg / h principle of long original fluid humidification of the dry mist humidification with its humidification performance, low energy saving performance, high cost performance and convenient maintenance of many advantages.
- Air consumption for individual nozzles: 0.056m3/min
- Individual nozzle area for: 80m2
- Power frequency: 220V/50Hz
- Air pressure: 0.7-1.0Mpa
- Water supply pressure: 0.1-0.6Mpa
- Water quality: Drinking water or deionized water
- System humidification: 49kg/h
The dry mist humidification of the long-field two fluid humidifier is humidified with its non-humidified humidification performance, low energy saving performance, high cost performance and convenient maintenance of many advantages, dry mist humidification tank through the gas and water two fluids mixed, and then through three gasification shearing effects, is sprayed from the vents of sound air again, and from another vent is also the same particles of the moisture in the same way, the same time, the occurrence of 33,000 to 40,000 Hz.
- The average spray particles are 5-7.5μm;
- the spray can reach a maximum of 11k / h of strong humidification ability;
- humidification area ground and equipment surface is not tidal, not wet, not decomposition;
- the use of bacteria is not easy to reproduce ultra-small water storage tanks;
- energy saving, more than the equivalent of similar products to save 35% of the air consumption;
- Automatic control through the timer and controller;
- If the assembly uses a pure water processor, there is no need to clean the humidifier