- Home
- Companies
- BDC ELECTRONIC S.r.l.
- Products
- BDC - Cylindrical Inductive Atex ...
BDC - Cylindrical Inductive Atex Sensors in Metal Housing - Diameters 12 - 18 - 30 mm
With this new series of sensors it’s possible to drive specific inputs for NAMUR sensors or inputs for 2 wires amplified switches with low current (up to 10 mA). The load can be applied on both terminals (function PNP or NPN). The output is internally triggered and monitored by LED.
Cable: 2 m PVC CEI 20-22 II; 90°C; 300 V; O.R.
Housing: nickel plated brass
Sensing face: plastic
Working voltage: 7,7 ÷ 9 Vdc
Max ripple: 10%
Off-state current (Ir): ≤ 1 mA
Minimum operational current (Im): 2 mA
Rated operational current (Ie): 10 mA
Voltage drop (Ud) with load 10 mA: < 6,5 V
Voltage drop (Ud) with load 8 mA: < 5 V
Temperature range: - 20° ÷ +60°C
Max thermal drift of sensing distance Sr: ± 10%
Repeat accuracy (R): 2%
Switching hysteresis max (H): 10%
Degree of protection: IP67
Switch status indicator: yellow LED
Cable conductor cross section: 0,35 mm2 in diameter 12 mm 0,75 mm2 in diameters 18 and 30 mm
Marking: II 1D Ex iaD 20 T80°C II 1G Ex ia IIC T6
Certified IMQ 08 ATEX 010
Protected against short-circuit and overload
Protected against any wrong connection
Electromagnetic compatibility (EMC) according to EN60947-5-2
According to: EN60947-5-6/EN60079-0/EN60079-11/EN60079-26
Shock and vibration resistance according to EN60068-2-27/EN60068-2-6
Vi max: 13,5 V
Ii max: 60 mA
Ci max: 100 nF
Li max: 100 μH
Pi max: 200 mW