FAMCO EVOx - Double Acting Air Presses

Double rod end on the heavy-duty air cylinder allows for stroke adjustment from 0 to the maximum cylinder stroke. Air power on the return stroke efficiently lifts heavy die loads or accommodates stock stripping operations.

Sturdy ram housing provides generous bearing surface for the large, round ram which is keyed to prevent rotation. Lubricator, filter, gage and mufflers are furnished as standard equipment on all control models.

1 thru 5 ton capacities.

Control & Accessories to meet your production requirements

• INTERVAL TIMER – Allows for time dwell at either the bottom or top of stroke. Available in maximum time cycles of 5, 15, 30 and 60 seconds or minutes. Infinitely variable from zero to maximum cycle of the particular timer. It is necessary to specify when time cycle is required.
• REPEAT CYCLE TIMER – Allows for separate time and dwell both at bottom and top of the stroke. The time dwells may be individually cycled at the top and bottom of the stroke within the maximum range of the timer. For example, the time dwell may be set for 3 seconds at the top of the stroke and 5 seconds at the bottom of the stroke. Once set and started the press is fully automatic and requires no further attention. Available in maximum time cycles of 3, 5, 15, 30 and 60 seconds or minutes. It is necessary to specify the time cycle required.
• DOUBLE ELECTRIC (DE) CONTROL – Two push-buttons must be operated to activate the solenoid air valve for downward movement of the ram. When contact with both push-buttons is maintained through full work stroke, ram will stay down until one or both pushbuttons are released. Ram then immediately returns to the original start position.
• PRESSURE CONTROL – There are jobs where applied force is the most important factor. The pressure limit system has been designed to provide a controlled maximum ram pressure and automatic return of the ram after the pressure has been reached. Adjustment of the pressure limit switch is possible in a range of from 5 psi to 150 psi. May be added later to press, or may be specified on the original order.
• SPEED CONTROL VALVE – The speed control valve is available for all FAMCO Air Presses. It meters the air intake and thus regulates the speed of the lam on the down stroke. The regulation of the ram speed can be from zero to the maximum speed of the press. This simple, efficient speed control valve has proven a great asset to all air presses on which it has been installed.