AVIOSYS - Model IPPower 9828-P -Double Port Compate Remote Power Controller

2x C13 outlet, 10A
100~240VAC C14 in,max 15A
(LxWxH slim) 195x88x35mm
Latched Relay design(Green)
2x Ethernet RJ45
2x programmable button
Surge suppressor circuit
Timer inside
1xAmmeter
Option wireless
VPN Client

• • Support HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS.
• • Support Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT.
• • Support Telnet/SSH.

HTTP API Command your IPPower through a friendly web interface, via a curl, from a command line, or from your own application via an HTTP get post API(CGI).

MQTT API Command your IPPower through MQTT bridge of a topic, via a publish and subscribe.

Wake ON LAN IPPower allows you to remotely wake up the network devices from shutdown via the Wake on LAN (WOL) service. You can enable IPPower to the WOL service and wake them up via the MAC address list. Before applying the WOL service, make sure the target device supports WOL.

Shutdown on LAN Since improper shutdowns may result in file system errors, IPPower provide a keep resident software on PC. IPPower allows you to remotely shutdown the network devices from pc on runing via the shutdown on LAN (SOL) service. You can enable IPPower to the SOL service and shutdown them via software and after delay timeout then turn off power.

PING Ping function provides 2 IP with with AND OR logic combination. When the specified IP does not respond to PING, IPPower will perform a user-defined power action. The action can be select outlet on/off/power-cycle, shutdown on LAN/wake on LAN and email notification.

Schedule Task Scheduler allows you to schedule and run actions at pre-defined time table. There are 30 time table which are selected from web calendar of everyday,week or once. When the time up IPPower perform a user-defined power action. The action can be select outlet on/off/power-cycle,shutdown on LAN/wake on LAN and email notification.

Measure total IP9828-P current

ippower support modbusTCP client,
combine with SCADA tool for sysem
integration

All the event will be wite on website and send to syslog host server.

User-definable power status on/off/last time

In M2M mode, if you control IPPower-A,
the other IPPower-B will do the same job.
It is easy to monitor the remote sites

Remote Control
If enable CNT function, please download
Andriod and ios APP and Nod-red software package
to control and monitor

VPN client mode
IPPower can connect with a VPN router.
It can be controlled and monitored at the same VPN

Remote Control
If enable SMTP function, If the status changed,IPPower will send notifications by email
If enable POP3 function, IPPower can be controlled from email

Dimensions: 195 x 100 x 35mm( L / W / H ) ( Width included two mounting ear kits of boths sides - 2.5mm x 2 )
Power input: 100~240VAC
Maximum current per outlet: 10A
Maximum current total 2 outlets: 15A 110V; 10A 220V
Relay Type: Magnetic Latching Relay
Interface: LED indicator lights; HW Reset button; Two push buttons
Operating temperature: -10°C~ 60°C( 14°F~ 140°F )
Network: RJ-45 10/100Mb Ethernet Port x 2; Host Port; Lan Port