Draygon - Model DRG 7 -5.5 GPH -Electric Run Dry Wastewater Evaporator

These highly efficient wastewater disposal evaporators are very easy to install and operate and have a fully automatic option that also provides for off-peak electrical rate usage if available in your area.

The DRG 7 Run Dry Wastewater Evaporator 60 gallon/227 liter evaporation chamber is constructed of 316L stainless steel, but can also be fabricated in a selection of other materials depending on the nature of your wastewater disposal stream.

The DRG 7 is a “Run Dry” unit that can be run until dry without damaging the unit and completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume. A fully automatic option is available.

Options for Draygon Wastewater Evaporators include:

Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.

Models

• Manual Fill And Automatic Options

Evaporation Rate

• Up to 5.5 Gallons/Hr.
• The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).

Dimensions (L/W/H)

• 48 x 37 x 40″ (Excluding stack)

Maximum Tank Capacity

• 60 Gallons

Heating Fluid

• 45 Gallons

Electrical Requirement

• 208, 240 and 480V/3 Phase 15KWSingle phase and other voltages also available, contact Draygon for more information

Weight Including Heat Transfer Fluid

• 948 lbs.

Heating Chamber

• High Tech Insulation

• Fast Payback/ROI
• Run Dry-Run Dry Without Damage
• Up To 99% Waste Stream Reduction
• Fast Installation
• Easy Operation And Cleaning
• Exhaust Draft Induction Fan
• Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
• Multiple Safety Features
• Wettable Surfaces
  316L Stainless Steel
  (Other materials available)
• 316L Stainless Steel Tank Standard
  AL6XN And Other Corrosion Resistant Materials Available
• No Sewer Connection Required
• No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
• 2-Year Limited Warranty

• Parts Washing
• Printing Inks/Dyes
• Vehicle Washes
• Photo Processing
• Metal Fabrication
• Metal Finishing/Plating
• Floor Scrubbing Water
• Marina Bilge Water
• Air Condensation
• Ceramic Coating Wastes
• Compressor Condensate
• Degreasing Operations
• Screw Machine Shops
• Truck/ Car Washes
• Coolants
• Most Aqueous Waste Streams