- Home
- Companies
- Det-Tronics - Detector Electronics ...
- Products
- Eagle Quantum - Model EQ3720RM - ...
Eagle Quantum - Model EQ3720RM -Premier 8 Channel Relay Module
The 8 Channel Relay Module is specially designed to expand the Output capability of the Det-Tronics Eagle Quantum Premier System. The unit is designed to provide eight relay output channels for use with non-supervised devices (PLCs, fans, dampers, motor control centers, etc.) or devices with their own supervision. System status can be determined using the troubleshooting procedures, Eagle Quantum Safety System Software (S3) and the status indicators on the module.
Led Indicators
LEDs on the front panel of the relay module are provided for indicating device status. The LED’s are tested upon power-up to verify their operation. The relay module has two LEDs for the device and two LEDs for each channel. On the device level, one green LED indicates power, while the other amber LED indicates a LON communication fault. For each channel, one red LED indicates channel activation and the other amber LED indicates that the module operating voltage is low or that the module has not been configured (all eight channel LEDs blink).
Mounting
The relay module is DIN rail or direct panel mountable for configurations requiring installation in NEMA or IP enclosures. DIN rail and mounting clip options must be specified at the time of order. Refer to the “Specifications” section for mounting arrangements and dimensions.
- Expands the output capabilities of the Det-Tronics Eagle Quantum Premier™ system
- Individual channel LEDs indicate Active status
- Provides remote output capabilities via LON/SLC
- Panel or DIN rail mounting
- Power LED display
- Plug-in wiring connectors
- RFI and EMI hardened (CE Marked)
- Programmable normally energized/de-energized contacts
- Programmable failed state on loss of communication with controller (Fail on / Fail off / Hold last state).