Draygon - Model DRG 2-1.7 -Electric Run Dry Wastewater Evaporator
The Draygon DRG 2 Electric Run Dry Wastewater Evaporator is an economical solution for disposing of aqueous waste water streams up to 1.7 gallons per hour. The DRG 2 Wastewater Evaporator can be run until dry without damaging the unit, and it completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume.
1.7 Gallons/Hour – High Efficiency
This highly efficient wastewater disposal evaporator is easy to install and operate and has a fully automatic option that also provides for off-peak electrical rate usage if available in your area.
The DRG 2 Run Dry evaporator chamber is constructed of 316L stainless steel, but can also be fabricated in a selection of other materials depending on the nature of your wastewater disposal stream.
The DRG 2 is Draygon’s best “Run Dry” wastewater evaporator for small volume applications.
“Run Dry” means the evaporator can be run until dry without damaging the unit, completely drying most waste streams to a fraction of the original volume. The DRG 2 has an ON/OFF switch, temperature dial and redundant safety shut-off thermostats, and a fully automatic option is available.
Options for Draygon Wastewater Evaporators include:
Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.
Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.
Operating Type
- Manual Fill/Run Dry, Automatic Option Available
Evaporation Rate
- Up to 1.76 Gallons/hr
- The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).
Typical Operating Power
- 5 KW
Dimensions (L/W/H)
- 25x25x28″/64x64x71cm (excluding stack)
Weight—Including Heat Transfer Fluid
- 550 lbs/198kg
Maximum Tank Capacity
- 16 Gallons/60 Liters
Evaporation Chamber
- 16x16x16 in/41x41x41 cm
Electrical Requirement
- 220 Volts, Single Phase, 5KW
Heat Transfer Fluid
- 11 Gallons
- Fast Payback/ROI
- Run Dry-Run Dry Without Damage
- Up To 99% Waste Stream Reduction
- Fast Installation
- Easy Operation And Cleaning
- Exhaust Draft Induction Fan
- Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
- Multiple Safety Features
- Wettable Surfaces
316L Stainless Steel
(Other materials available) - 316L Stainless Steel Tank Standard
AL6XN And Other Corrosion Resistant Materials Available - No Sewer Connection Required
- No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
- 2-Year Limited Warranty
The DRG 2 is perfect for waste streams from these applications and more:
- Parts Washing
- Printing Inks/Dyes
- Vehicle Washes
- Photo Processing
- Metal Fabrication
- Metal Finishing/Plating
- Floor Scrubbing Water
- Marina Bilge Water
- Air Condensation
- Ceramic Coating Wastes
- Compressor Condensate
- Degreasing Operations
- Screw Machine Shops
- Truck/ Car Washes
- Coolants
- Most Aqueous Waste Streams