Samson Aktiengesellschaft
- Home
- Companies
- Samson Aktiengesellschaft
- Products
- Samsomatic - Model 6051 - Electrical ...
Samsomatic - Model 6051 -Electrical Transmitter
The electrical transmitter is used to measure gauge pressures or absolute pressures and convert these measured values into an electric output signal. It is suitable for use with gases, vapors or liquids and can be equipped with an external pressure transmitter.
Most popular related searches
capacitive sensor
pressure monitoring
intrinsic safety
diaphragm sealing
pressure transmitter
pressure gauge
- Microprocessor manufactured using SMD technology
- Operation and adjustment using a rotary switch and a button LC display, 31/2 digits (optionally),display range from 1999 to 1999
- Corrosion-resistant enclosure with degree of protection IP 65
- Suitable for gases, steam and liquids
- Suitable for gauge and absolute pressure measurements
- Interchangeable measuring element
- Capacitive ceramic sensor for spans ranging from 0.02 to 69 bar and 0.04 to 70 barabs
- Piezoresistive sensor for spans ranging from31 to 399 bar and 32 to 400 barabs
- Overload limit ranges from 1.5 to 40 times the span
- Easy adjustment of zero point and span
- Zero point shift adjustable from 0 to 80 %
- Span ratio of 1:5 is adjustable
- Accuracy 0.2 % (capacitive sensor) or 0.5 % (piezoresistive sensor)
- 4 to 20 mA output signal in two-wire connection;
- operating direction or selectable
- Type of protection ”Intrinsic safety“ II 2 G EEx ia IIC T6 (optionally)
- Damping of the output signal selectable from 0.015 to 15 s
- Error signal is selectable
- Electrical connection by means of a cable gland M 20 1.5
- screwed to a terminal or with plug-type connector Connecting piece G 1/2 A acc. to DIN 16288
- Screw-type, flange-type, inline or cell diaphragm seal(optionally)
- Fill fluid: silicone oil, vegetable oil or vacuum oil for general
- Applications or oxygene service