Elite - Model 11 -Remote Infuse/Withdraw Nanomite Programmable Syringe Pump

The Pump 11 Elite Nanomite Syringe Pump is very easy to use with an LCD color touch screen and icon interface. This pump allows you to create, save and run simple to complex Methods without a PC. The Method profiles available on this pump are Constant Rate, Ramp, Gradient (binary) and Autofill. Delays can be set using the relative time clock.

The Message Area of the touch screen is used to display helpful instructions for the currently displayed screen. It is also used to display error or warning messages to indicate problem conditions in a Method or error conditions during pump operation. The Run Screen shows all of the pump parameters on one screen for easy review.

The Pump 11 Elite Nanomite Syringe Pump is very easy to use with an LCD color touch screen and icon interface. This pump allows you to create, save and run simple to complex Methods without a PC. The Method profiles available on this pump are Constant Rate, Ramp, Gradient (binary) and Autofill. Delays can be set using the relative time clock.

The Message Area of the touch screen is used to display helpful instructions for the currently displayed screen. It is also used to display error or warning messages to indicate problem conditions in a Method or error conditions during pump operation. The Run Screen shows all of the pump parameters on one screen for easy review.

The software is organized into three main navigational branches, the quick start Methods, user-defined Methods, and system settings. You can control operations directly through the touch screen or remotely from an independent computer or device via the external I/O interface.

The Pump 11 Elite Nanomite has a footswitch input, USB serial port for computer control, RS-485 ports for daisy chaining pumps and Digital I/O for external control via an independent computer or device. There is also an option for daisy chaining pumps through the RS-232 (RJ-11) ports. This option must be ordered at the time the pump is ordered.

This pump consists of a control unit, an injection unit, a 6-foot cable to connect the two units and a footswitch.

• Easy-to-use LCD color touch screen with GUI interface 
• Light weight makes it ideal for hand-held or stereotaxic injection 
• Up-front control knobs for ease of operation 
• Quick start methods 
• Easily Program simple to complex methods without a PC 
• Relative time clock
•  Vertical or horizontal orientation 
• 11 lb linear force adjustable across the entire flow range 
• Can daisy chain pumps 
• CE, ETL (CSA, UL), WEEE, EU RoHS, CB Scheme Approved 
• 2-year warranty

• Cellular Injections 
• Drug Delivery 
• Microinjections 
• Hand-held Automated Delivery 
• Stereotaxic Injections 
• Feeding Cells 
• Regenerative Medicine

• Accuracy ±0.5%
• Classification Class I
• Dimensions, Control Box, L x D x H 9.0 x 7.0 x 3.67 in (22.6 x 17.78 x 9.32 cm)
• Dimensions, Mechanism, L x D x H 2.5 x 2.0 x 7.5 in (6.35 x 5.08 x 19.05 cm)
• Mechanism Mounting Post, OD 0.3125” (0.793 cm) OD
• Mechanism Mounting Post, Length 3.25” (8.25 cm)
• Display 4.3" WQVGA TFT Color Display with Touchpad
• Drive Motor 1.8° Stepper Motor
• Environmental Humidity 20% to 80% RH, non condensing
• Environmental Operating Temperature  40°F to 104°F (4°C to 40°C)
• Environmental Storage Temperature 14°F to 158°F (-10°C to 70°C)
• Flow Rate Maximum 3.818 ml/min using 1 ml syringe
• Flow Rate Minimum 3.66 pl/min using 0.5 µl syringe
• I O TTL Connectors 15-pin D-Sub Connector
• Input Power 12-30 VDC
• Installation Category II
• Max Linear Force 11 lb @ 100% Force Selection
• Mode of Operation Continuous
• Motor Drive Control Microprocessor with 1/16 microstepping
• Net Weight, Control Box  4.32 lb (1.96 kg)
• Net Weight, Remote Mechanism 1.01 lb (0.458 kg)
• No of Syringes 1
• Non Volatile Memory Storage of all settings
• Number of Microsteps per one rev of Lead Screw 3,200
• Pollution Degree 1
• Pump Configuration Remote
• Pump Function Infuse/Withdraw, Programmable
• Pusher Travel Rate Maximum 228.97 mm/min
• Pusher Travel Rate Minimum 0.433 µm/min
• RS 232 Connectors optional RJ-11
• Regulatory Certifications CE, ETL (UL, CSA), WEEE, EU RoHS & CB Scheme
• Step Rate Maximum 52 µsec/µstep
• Step Rate Minimum 27.5 sec/µstep
• Syringe Rack Type Standard Rack
• Syringe Size Maximum 1 ml
• Syringe Size Minimum 0.5 µl
• USB Connectors Type B
• Voltage Range 100-240 VAC, 50/60 Hz