Elite - Model 11 -Standard Infusion Only Syringe Pumps

These innovative syringe pumps have a new mechanism that includes a tight gripping, more secure syringe clamp for syringes ranging from 0.5 ul to 60 ml (single syringe) and 0.5 ul to 10 ml (dual syringe). The Pump 11 Elite Series offers enhanced flow performance with high accuracy and smooth flow from 1.28 pl/min to 88.28 ml/min.

The Pump 11 Elite Infusion Only Models are available in single or dual syringe rack configurations. These pumps have advanced connectivity with a USB serial port for computer control and footswitch connection for stop/start control (footswitch sold separately).

The Pump 11 Elite Series is a family of accurate, low flow syringe pumps designed for use in applications including: mass spec calibration, drug and nutritional studies, reactor dosing, and electro-spinning.

These innovative syringe pumps have a new mechanism that includes a tight gripping, more secure syringe clamp for syringes ranging from 0.5 µl to 60 ml (single syringe) and 0.5 µl to 10 ml (dual syringe). The Pump 11 Elite Series offers enhanced flow performance with high accuracy and smooth flow from 1.28 pl/min to 88.28 ml/min. 

The Pump 11 Elite Infusion Only Models are available in single or dual syringe rack configurations. These pumps have advanced connectivity with a USB serial port for computer control and footswitch connection for stop/start control (footswitch sold separately). The infusion Only (single and dual syringe models) support infusion operations at user-defined flow rates and with selectable target volume or time values to control the total infusion volume. The Infusion Only models do not include programmable, user-defined methods. (Infusion/Withdrawal Programmable models are also available)

Easy-to-Use Interface

The Pump 11 Elite color LCD touch screen with graphic user interface is divided into three basic areas: Operations Display, Message Area, and Navigation. This configuration allows you to easily move through all menu selections and data entry by gently touching the onscreen buttons with a finger or the tip of a soft, non-sharp object such as a pencil eraser.

The Quick Start infusion screen is the primary "home" for the pumps. From that screen you can access all the commands needed to operate the Pump 11 Elite, as well as access the main system settings.

The Message Area of the touch screen is used to display helpful instructions for the currently displayed screen. It is also used to display error or warning messages to indicate problem conditions in a Method or error conditions during pump operation.

You can control operations directly with the touch screen or remotely from an independent computer or device via the external footswitch interface.

• Accuracy ±0.5% ±0.5%
• Classification Class I Class I
• Dimensions Control Box
•  9.0 x 7.0 x 6.0 in
• (22.6 x 17.78 x 15.0 cm)
• Display 4.3" WQVGA TFT Color Display with Touchpad 4.3" WQVGA TFT Color Display with Touchpad
• Drive Motor 0.9° Stepper Motor 0.9° Stepper Motor
• Environmental Humidity 20% to 80% RH, non condensing 20% to 80% RH, non condensing
• Environmental Operating Temperature 40°F to 104°F (4°C to 40°C)  40°F to 104°F (4°C to 40°C)
• Environmental Storage Temperature 14°F to 158°F (-10°C to 70°C) 14°F to 158°F (-10°C to 70°C)
• Flow Rate Maximum 88.28 ml/min using 60 ml syringe 31.97 ml/min using 10 ml syringe
• Flow Rate Minimum 1.28 pl/min using 0.5 µl syringe 1.28 pl/min using 0.5 µl syringe
• I O TTL Connectors 15 pin D-Sub Connector 15 pin D-Sub Connector
• Input Power 12-30 VDC 12-30 VDC
• Installation Category II II
• Max Linear Force 35 lb @ 100% Force Selection 35 lb @ 100% Force Selection
• Mode of Operation Continuous Continuous
• Motor Drive Control Microprocessor with 1/16 microstepping  Microprocessor with 1/16 microstepping
• Net Weight  4.6 lb (2.1 kg) 4.6 lb (2.1 kg)
• No of Syringes 1 2
• Non Volatile Memory Storage of all settings Storage of all settings
• Number of Microsteps per one rev of Lead Screw 15,360 15,360
• Pollution Degree 1 1
• Pump Configuration Standard Standard
• Pump Function Infusion Only Infusion Only
• Pusher Travel Rate Maximum 159.8 mm/min 159.8 mm/min
• Pusher Travel Rate Minimum 0.18 µm/min 0.18 µm/min
• RS 232 Connectors optional RJ-11 optional RJ-11
• Regulatory Certifications CE, UL, CSA, CB Scheme, EU RoHS CE, UL, CSA, CB Scheme, EU RoHS
• Step Rate Maximum 26 µsec/µstep 26 µsec/µstep
• Step Rate Minimum 27.5 sec/µstep 27.5 sec/µstep
• Syringe Size Maximum 60 ml 10 ml
• Syringe Size Minimum 0.5 µl 0.5 µl
• USB Connectors Type B Type B
• Voltage Range 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz