Endee - Model UV-IR -UV-IR Flame Detectors
UV-IR Flame Detector is a combination of a UV andIR flame detector which utilizes a microprocessor for sophisticated electronic signal analysis. When a UV optical sensor is integrated with an IR sensor, a dual band detector is created that is sensitive to the UV and IR radiation emitted by a flame. The combined UV-IR flame detector offers increased immunity over the UV detector, operates at moderate speeds of response, and is suited for both indoor and outdoor use.
- Highly Sensitive - detects cigarette lighter flame from 5 meters.
- Flame detection exceeding 50 meters.
- Scans an area instead of spot detection.
- Fast Response Time.
- Solar and artificial light blindness.
- Rugged electronic, module.
- Weather Proof / Explosion proof housing.
- Design for used in hazarduous /non hazarduous locations.
- Low power consumption 12/24 VOC or 220 VAC Operation
- Technology UV-IR Technology
- Response Time < 3 seconds
- Cone of vision 120° minimum
- Optical Self-Test Automatic continuous optical path
- Alarm Reset Automatic or manual when flame is no longer detected
- Communication Available with optional MODBUS (RS-485) facility / HART
- Operating Temperature 40°F to 185°F (-40°C to 85°C)
- Dimensions 125 X 125 X 71 mm
- Compliance EN 54-10
The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.
Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee`s commitment to research, design and product improvement, specifications are subject to change without notice
- Cigarette Lighter 1 inch flame from 5mtr
- Alcohol 30mtrs(lxlft.Panfire)
- Gasoline 50mtrs(lxlft.Panfire)
- Jet Fuel 50mtrs(lxlft.Panfire)
- Butane 05 mtrs. (lxl inch flame)
- Hydrogen Fuel 75 mtrs (6x6 inch Pan fire)
- 02 Ranges 0-5 Vol% to 0-25 Vol%
- Electric Spark 50mtr5.(15VACorDC)
The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.
Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee`s commitment to research, design and product improvement, specifications are subject to change without notice