ENVEA - Model MIR 9000H -Heated Multi-Gas NDIR-GFC Analyzer
FromENVEA
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and H2O.
Most popular related searches
multi-gas analyzer
multi-gas
flue gas treatment
gas analyzer
flue gas
EN 15267
heated sampling system
ammonia gas analyzer
wet flue gas
NDIR gas analyzer
Heated Multi-Gas NDIR-GFC analyzer for emission compliance and analysis of wet sample gases in corrosive applications, including DeNOx (SCR / SNCR) and for the optimization of flue gas treatment processes.
- QAL 1 certified by the TÜV to EN 15267-3
- QAL3 compliance as defined by EN 14181
- Temperature maintained at 180°C from the sampling point to the measurement cell for no sample loss or gas composition changes
- Can be used to measure raw & purified flue gas for desulfurization / denitrification process control
- Designed to measure wet and corrosive samples
- Perfect analyzer for ammonia slip detection
- Robust design with a stainless steel tight box enclosure to withstand industrial environments
- No nitrogen required for calibration – can use clean & dry compressed air
- QAL1 certified analyzer, offering very accurate measurements
- Acquisition / management of peripherals measurements (particulates, temperature, flow…)
- Embedded HMI with Graphic LCD display and interactive menu driven firmware, no computer required
- Remote access for all analyzer functions (visualization/ maintenance / configuration / backup…..)
- Optimized operation cost (low maintenance and low consumables requirement)
- Ideal for process control in ammonia slip applications or NH3 leakage detection
- Process Control as DeNOx (SNCR, SCR) or other flue gas treatments
- Energy From Waste incineration (EFW) : Municipal, Hazardous, Industrial, Special, Hospital
- Biomass
- Power & Combustion
- Cement Kilns
- Pulp and Paper
- Combustion control: industrial Boilers and Furnaces in Chemical & Petrochemical Plants, etc.
Measurable parameters
Pollutant: Range
- HCI: 0-100 / 5000
- HF: 0-40 / 300
- NO: 0-200 / 5000
- NO2: 0-200 / 5000
- NOx: 0-200 / 5000
- SO2: 0-500 / 5000
- CO: 0-75 / 1000
- NH3: 0-15 / 500
- H2O (%): 0-30 / 40
- CO2(%): 0-10 / 100
- O2(%): 0-10 / 25
Lowest / Highest available ranges expressed in mg/m3 (may vary with your site conditions to be indicated on the Site Survey Form)
Technical Specifications
- QAL1 to EN 15267-3 certified: YES
- US EPA compliance: YES
- Sampling technology: Hot/Wet Extraction
- Sample transfert: 180°C heated sampling line
- back flush function: YES
- span injection: YES on analyser or at sample point
- Built-In O2 option: YES
- Serial link communication: RS232 / RS422
- Other Communication: Ethernet
- Analogue OUTPUTS: YES (x 8)
- Analogue INPUTS: YES (x 4)
- Dimensions (mm): Tight box: 710 x 560 x 300 (D x W x H)
Complete system would normally comprise of:
- Sample input
- Heated multi-reflexion optical bench
- Infrared beam
- Mirrors
- Correlation wheel
- Interferential filter wheel
- Sample output
- Compliance with MCP Directive, BREF Incineration, LCPD and WID applications
- QAL 1 certified by the TÜV to EN 15267-3
- QAL3 compliance as defined by EN 14181
- U.S. EPA approved as compliant with 40 CFR 60 ET 75