ENVEA

- Model PCME STACK 710 - Opacity Approved Particulate CEM

From

0

QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement.

  • Outstanding reliability with no continuously moving parts
  • Automatic in-situ zero and span checking with built-in calibration audit and zero drift correction
  • Dual light source, with patented Flood LED source provides robust check of the detectors and minimises effects of temperature instability

  • Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
  • Non-condensing / dry flue gases

Typical Applications:

  • Incineration
  • Metals (eg Steel/Aluminium)
  • Minerals (eg Cement/Gypsum)
  • Chemicals (eg Refinery / Rubber)
  • Power Generation Plant (eg Coal/Biomass)

  • Measured parameters: Dust
  • Technology: Opacity
  • Measurement/Monitoring capability: 0-100%*
  • Stack/Duct diameter suitability: up to 10m
  • Flue gas temperature: up to 600°C
  • Baghouse: YES
  • Cartridge Filter: /
  • Ceramic Filter: /
  • Coalescent Filter: /
  • Cyclone: /
  • Electrostatic Precipitator (ESP): YES
  • Wet Electrostatic Precipitator (WESP): /
  • Wet Scrubber: /
  • Sensor variants: Cast aluminium, epoxy coated
  • QA checks: YES

  • Measurement capability: 0 – 100% (opacity); 0-1000 mg/m3 (concentration)
  • Sensor Variants: cast aluminium, epoxy coated
  • Stack Temperature Ranges: up to 600°C
  • Functionality and QA Checks: Automatic zero and span; automatic correction for zero drift
  • Interface:
    • Available as standalone sensor pair (no controller) or with either standard control unit (Interface module) for single stack or with ProController for multi-sensor networks
    • Available with standard control unit (Interface module) for single stack or with ProController for multi-sensor networks
  • On-board data logging (control unit only): User configurable Long term, Short term or Pulse logging
  • Output: RS232, RS485 (Modbus), Ethernet Digital Alarm and 4/20mA (number of outputs dependant on system configuration (with or without controller)
  • Air Purge: blower required
  • Enclosure Protection Rating: IP65

  • TÜV (UBA) certified to EN15267-3
  • QAL1 as defined by EN14181
  • QAL3 compliance to EN14181
  • PS-1 compliant
  • GOST / EAC Approved

Customer reviews

No reviews were found for ENVEA - Model PCME STACK 710 - Opacity Approved Particulate CEM. Be the first to review!