- Home
- Companies
- JBMbio.com
- Products
- EnviroDEFENSE - Model ED 0209.1 - ...
EnviroDEFENSE - Model ED 0209.1 -SurfacePRO 10X
EnviroDEFENSE SurfacePro 10X is a concentrated liquid bacterial cleaner and degreaser for use on any type of hard surface. Its effective cleaning and degreasing power comes from a formula that combines eco-benign surfactants and solvents together with a specially selected bacterial consortium for the deep cleaning of almost any soils and wastes. EnviroDEFENSE SurfacePro 10X can be used as a cleaner for surfaces such as restroom floors, toilets, urinals, industrial floors, machinery, tools and general household cleaning. EnviroDEFENSE SurfacePro 10X is a powerful cleaner that leaves no streaks and contains a mild orange fragrance. 10x formula dilute 9:1, tap water to SurfacePro 10X.
- Emulsifies Grease & Soils On Contact
- Breaks Down Fat & Grease Build-Up
- Cleans All Hard Surfaces
- Liquid, 0.5 Gallon
- Liquid, 1 Gallon
- Liquid, 2.5 Gallon
- Liquid, 55 Gallon
Product Specifications: In addition to select strains of bacteria, EnviroDEFENSE® SurfacePro 10X contains the following enzymes for rapid degradation of waste:
- Protease: Digestion of Protein
- Cellulase: Digestion of Cellulosic Particles
- Lipase: Digestion of Fats & Oils
Applications:
Commercial Restroom & Household Application: Mix 16 oz. (473 ml) EnviroDEFENSE SurfacePro 10X per 1 gallon (3.78 L) of water for mop or home scrubbing applications. EnviroDEFENSE SurfacePro 10X may also be used as a pre-treatment. Mix 4 oz. (118 ml) of SurfacePro 10X per 32 oz. (946 ml) of water and pretreat areas for 30-45 seconds prior to cleaning.
Heavy/Industrial Application: Mixing Instructions: Mix EnviroDEFENSE SurfacePro 10X Concentrate 4:1 (4 Parts Water/ 1 Part EnviroDEFENSE SurfacePro 10X)
- Liberally Spray Over Affected Area & Let Stand For 30-45 Seconds.
- Scrub Affected Area.
- Rinse With Water Or Power Wash If Accessible.
*For Extremely Heavy Problems A Double Application May Be Necessary.
Drain Build-Up Remover Application: EnviroDEFENSE SurfacePro 10X is ideal for use as a household or industrial drain build-up remover. Applications may vary but as a standard, apply 2 oz. (29.57 ml) a week for slow running drains. Frequency can be increased daily if necessary.
Parameters: For biology to work properly, certain water conditions must exist:
- pH of the water maintained between 5.5 & 9.5.
- Temperature of the water above 10°C (50°F).
- Dissolved oxygen levels must be above 3 ppm.
EnviroDEFENSE® SurfacePRO 10X should not be stored in direct sunlight or in temperatures in excess of 100°F. Avoid storage in areas with strong oxidizers or poor ventilation. Please refer to the Safety Data Sheet (SDS) for proper handling procedures.
The EnviroDEFENSE® SurfacePRO 10X products are stable for a minimum of 24 months
In case of contact with the skin or eyes, promptly rinse with water for 15 minutes. The product is generally considered safe but is not designed to be directly ingested. For detailed handling information, please refer to the appropriate Safety Data Sheet.
The technical service team at BCMbio can provide custom solutions and recommendations.