Envirotech - Tea Point Water Leak Detector Kit

The tea point water leak detection kit is our most popular leak detection package it has been used in well over 200 locations to protect office tea points, coffee stations and office kitchens from water leaks.  Everything required is included in the kits to enable you to install quickly and easily.  A LeakStop alarm panel connects to a 3 metre length of sensor tape which can be put under the kick boards or under the floor (if there’s a raised floor) to detect the presence of water.  Should a pipe or a fitting leak for any reason, the water will collect on and around the sensor tape.  As soon as this happens the alarm panel will sound and show a Red warning light.  At the same time a valve will automatically close, isolating the water to the area and preventing further damage due to water ingress.  All our tea point water leak detector packages also come with a BMS connection as standard.

Product Features

• Detects the presence of water and outputs an alarm.
• BMS interface via a volt free relay output and relay output as standard for connection to valves, sounder/beacons, repeater panels and text diallers.
• Easy to install utilising push fit terminal connectors, minimal commissioning and maintenance required.
• This kit includes everything required to protect your tea point / kitchen area including an auto shut-off valve and sensor

Water (unless purified) contains contaminants such as ions and salts and it’s these within the water that are conductive. The sensors (conductors) used for leak detection are separated by a carrier and the water acts as a path for very low electrical signal to pass from one to the other. It is this action that triggers the alarm.

LEAKSTOP: Single zone water leak detection alarm panel with connection for solenoid valve and a volt free relay for connection to an external device such as a text dialler or beacon.

SENSOR TAPE (3M): 3 meter length of water leak detection sensor tape with moulded plug and socket. Designed to detect the presence of water at any point along its’ length.

VALVE: 15mm (1/2″) Actuated Ball Valve 230VAC solenoid valve used to switch off the water supply to the area.

ACCESSORIES: Kit includes 3 metre connection cable to connect sensor tape to the alarm panel. 2 metres of electrical flex to connect to the 230VAC supply. 10 metres of electrical flex to connect to the valve and 5 self adhesive floor clips to hold the sensor tape in position.