- Home
- Companies
- Eraly & Associés
- Products
- Eraly Associés - Temperature Controller
Eraly Associés - Temperature Controller
To be used optimally, our tube furnaces must be combined with temperature controllers. There are single loop regulators and multi-loop regulators: the number of control loops required by your system defines the type of regulator that is appropriate for your operations. Some experiments require the use of a simple temperature regulator which allows to define a set point and temperature ramp.
Programmable temperature controllers
Our programmable temperature controllers are equipped with a built-in profiling function that allows users to run programs with a variation of temperature according to a ramp and / or level at each stage of the heating process.
Temperature controllers offer a variety of possibilities for your laboratory furnaces:
- Controllers in Cascade (master / slave system)
- Management of the controller via a computer software
- Safety system to prevent overheating
- Inputs and Outputs USB / RS232 / RS 485
We integrate the PID in independent or not boxes to our furnaces. These boxes contain the necessary electrical equipment (transformers, capacitors, solid-state relays, on / off button ...) to make the use of temperature regulators much more convenient, user-friendly and secure.
In an independent case of 200 mm x 185 mm x 90 mm (without options)
Programmable Controller:
- Format 48 * 48 mm
- Up to 16 programs with 255 segments
- Regulation by SSR output (state relay)
- 2 to 4 Digital Inputs; Option
- Warm, Hot / Cold Control
- 2 sets of PID
- Universal Input (Pt100, Thermocouples, ...)
- Optional: External setpoint, Current measurement
Classic Controller:
- Format 48 * 48
- Universal Inputs
- 230 VAc power supply (24VAC / VD option)
- Regulation by SSR output (state relay)
- PID Regulation
- Optional (RS485, External setpoint, digital input)
Control, regulation and temperature display on:
- furnaces
- reactors
- materials
- Temperature display
- Classic control (set point + ramp)
- Control with program (set point + ramp + bearing and slopes)
- Safety with manual reset button / automatic oven shutdown if an alarm temperature is exceeded
- Cascade control/ For example: Product temperature variation is detected and automatically corrected through furnace temperature adjustment
- Possibility of digital inputs for Start-up, Shutdown and Programme pause
- Configuration and control via computer software (USB port; RS485)
- Low voltage feed via a toroidal transformer 230 V >> 24 or 48 V
- Furnace oscillation motor command/ For example for a reactive mixture...
- Several PIDs in the same case