Companies
Wyuna Separation Technology
Products
WyunaSep - Model ETPPS Series - ETP-Pre ...

WyunaSep - Model ETPPS Series -ETP-Pre Treatment Hydrocyclone Filter

FromWyuna Separation Technology

SHARE

WyunaSep ETP-Pre Treatment Hydrocyclone filter is a unique filter system that has no moving parts and is used for the removal of unwanted solids within water systems. This system can remove a variety of undesirable solids that are often found in water systems from natural debris. Undesirable solids can cause numerous problems within all manner of water systems. Unwelcome solids can lead to microbiological fouling within systems, as solids bring in the contaminating bacteria and can also provide a favorable environment for the bacteria to grow in. Unwanted salts and minerals can also lead to deposit and corrosion problems within most systems, as insoluble salts and minerals are the direct cause of deposit build up in water systems; and the breaking down of salts and minerals can result in nitrates being released into the water and raising rates of corrosion within a system.

Most popular related searches

hydrocyclone filter

wastewater treatment plant

waste oil collection

oil spill control

stormwater treatment

water treatment plant

wastewater treatment

Deposits and corrosion can cause many problems within your system such as reducing the efficiency of systems and causing them long term damage. Unwanted solids can also cause erosion and blockages which stop systems and cause unwanted down-time. Many of these problems caused by unwanted solids can be avoided with the use of a WyunaSep ETP-Pre Treatment Hydrocyclone filter system.

Hydrocyclone Systems can provide an economical and effective method for removal of solid particles in the sizes range of 4 to 100+ micron from various liquids with high load of solids in a slurry stage.

Hydrocyclone typically makes finer separations than practically possible with screening methods and at significantly higher capacities of flow.

In many applications Hydrocyclone can also be used in place of Decanter Centrifuges, providing the desired result at a much lower cost.

In many cases, it eliminates the need of costly and space and energy consuming scrappers to separate the solids from DAF or IAF systems.

Because of lower solid to water ratio in the separated slurry from a Hydrocyclone System, any need of a filter press is also sized down thereby saving further capital.

In the cases where compostable organics are higher in percentage in the slurry, we recommend composting of the sludge slurry to save cost and add value to output.

A hydrocyclone filter provides a solution to many problems caused by solids within water systems, saving you money in system efficiency and repairs in the long term. The filter also has no moving parts, meaning it has no operational cost - so you get a great ROI. These are just some of the many benefits that can be gained by applying a hydrocyclone filter to your system:

No filter elements, screens, bags or media
No cleaning costs
No down time – continuous filtration
Low water loss when purging
Low pressure loss
No backwash

No filter elements, screens, bags or media
Less space required to do the similar job with conventional systems
Lesser chemicals required in further treatments
Efficiency of the further treatments improves, as it reduces the solids load & in some cases BOD as well
No cleaning costs
No down time – continuous filtration
Low water loss when purging
Low pressure loss
No backwash

ETP Pre treatment -Solids /TSS separation to reduce BOD load
Waste water treatment plants – oil separator / classifier / sand/solid separator
Storm Water Treatment
Oil Spill Control / Fluids Treatment
Waste Oil Collection